Stowell Posted January 28, 2018 Share Posted January 28, 2018 I’ve just recently rebuilt my 2jz-ge NA-T supra , and being new too the supra I didn’t pay attention too the ht lead positions with them being numbered on the cap. Now she won’t quite start and I’ve discovered it’s had the 4Runner dizzy cap fitted which I was clueless too until I did some searching. I’ve basiclly followed the firing order 1-5-3-6-2-4, putting the leads on in that order going clockwise. It’s not quite starting, I’ve got spark, fuel and compression. I’m adamant it’s too do with the ignition timing, because when I rotate the housing fully anti-clockwise it won’t try too fire at all. If I rotate it fully clockwise it tried too fire. I’m just hoping somebody could be a gem and give me an order from the 4Runner distributor cap.. too the cylinder number. Thank you for any advice given it’s appreciated Link to comment Share on other sites More sharing options...
P_Bazz Posted January 28, 2018 Share Posted January 28, 2018 Spark Plug to Distributor 1 5 2 1 3 3 4 6 5 4 6 2 The 4 Runner engine is a V6 setup, hence the different firing order. Link to comment Share on other sites More sharing options...
ben_harmer32 Posted January 28, 2018 Share Posted January 28, 2018 you need an extra number 2 HT lead as well Link to comment Share on other sites More sharing options...
Stowell Posted January 28, 2018 Author Share Posted January 28, 2018 I really appreciate your help buddy! I’ll try that first thing tomorrow morning! I’ve been scratching my head for days! - - - Updated - - - I’ve bought a full new set of leads so I can use any of the 6 I have spare! Thanks Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 31, 2018 Share Posted January 31, 2018 Move all the leads on the cap one position clockwise and fiddle again. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now