Help needed with distributor wiring

[Stowell]

I’ve just recently rebuilt my 2jz-ge NA-T supra , and being new too the supra I didn’t pay attention too the ht lead positions with them being numbered on the cap. Now she won’t quite start and I’ve discovered it’s had the 4Runner dizzy cap fitted which I was clueless too until I did some searching.

 

I’ve basiclly followed the firing order 1-5-3-6-2-4, putting the leads on in that order going clockwise. It’s not quite starting, I’ve got spark, fuel and compression. I’m adamant it’s too do with the ignition timing, because when I rotate the housing fully anti-clockwise it won’t try too fire at all. If I rotate it fully clockwise it tried too fire.

 

I’m just hoping somebody could be a gem and give me an order from the 4Runner distributor cap.. too the cylinder number.

 

Thank you for any advice given it’s appreciated

[P_Bazz]

Spark Plug to Distributor

1 5

2 1

3 3

4 6

5 4

6 2

 

The 4 Runner engine is a V6 setup, hence the different firing order.

[ben_harmer32]

you need an extra number 2 HT lead as well

[Stowell]

I really appreciate your help buddy! I’ll try that first thing tomorrow morning! I’ve been scratching my head for days!

 

- - - Updated - - -

 

I’ve bought a full new set of leads so I can use any of the 6 I have spare! Thanks

[Chris Wilson]

Move all the leads on the cap one position clockwise and fiddle again.