Suprakeith Posted February 2, 2018 Share Posted February 2, 2018 Wow that’s stunning!!!! So wish I had the funds to have this done to mine. Link to comment Share on other sites More sharing options...
Mr2kyle Posted February 3, 2018 Share Posted February 3, 2018 Just noticed there you won't have side indicators....that ok? I understand you will have them at the front and the back of the car but is it an mot requirement or anything for them to be on the side too? Wish I could do a full rebuild like that! One day.... Link to comment Share on other sites More sharing options...
Lee P Posted February 8, 2018 Author Share Posted February 8, 2018 Yes Jay wanted them removed from the bumper for a cleaner look. Technically it can be an MOT failure yes. Subframes removed and stripped ready for refurb Link to comment Share on other sites More sharing options...
WayneW Posted February 9, 2018 Share Posted February 9, 2018 A-M-A-Z-I-N-G Can't wait to get mine painted, it won't be that hardcore but not so far If you go standalone, I'm interested in buying you/he the stock ECUs (engine and body) if you/he sell them ! Link to comment Share on other sites More sharing options...
Mr2kyle Posted February 9, 2018 Share Posted February 9, 2018 Ah sound thanks for letting me know. Looking great!! Link to comment Share on other sites More sharing options...
Sukhy Posted February 9, 2018 Share Posted February 9, 2018 This is coming along nicely.. Link to comment Share on other sites More sharing options...
MRX Posted February 9, 2018 Share Posted February 9, 2018 Amazing project, looking forward to following progress! Link to comment Share on other sites More sharing options...
Sheefa Posted February 9, 2018 Share Posted February 9, 2018 Stunning attention to detail. Link to comment Share on other sites More sharing options...
Lee P Posted February 9, 2018 Author Share Posted February 9, 2018 Fuel tank prepped and cleaned. PHR triple pump hanger built up and installed with walbro 485 pumps Rear fuel lines made up and fitted. Link to comment Share on other sites More sharing options...
Luxluc Posted February 10, 2018 Share Posted February 10, 2018 Awesome work SRD. Wow Link to comment Share on other sites More sharing options...
Supra-love Posted February 10, 2018 Share Posted February 10, 2018 Looks really good mate! Top work Link to comment Share on other sites More sharing options...
Lee P Posted February 16, 2018 Author Share Posted February 16, 2018 (edited) Subframes all ready and going back together. Main steel parts were blasted, treated and powder coated. Alloy sections were blasted and cleaned. Rear upper arms replaced with new New subframe bushes and diff bushes As the condition was good, all bolts were blasted, acid dipped, treated and zinc coated. Edited February 17, 2018 by Lee P (see edit history) Link to comment Share on other sites More sharing options...
Pudsey Posted February 16, 2018 Share Posted February 16, 2018 Loving the refreshed subframes. Super clean Link to comment Share on other sites More sharing options...
Ark Posted February 17, 2018 Share Posted February 17, 2018 I'm seriously impressed...I want! How much does something like this cost (ballpark)? There must be a lot of older shells out there like mine, needing this kind of attention, so how much should I be budgeting? Link to comment Share on other sites More sharing options...
Lee P Posted February 17, 2018 Author Share Posted February 17, 2018 I'm seriously impressed...I want! How much does something like this cost (ballpark)? There must be a lot of older shells out there like mine, needing this kind of attention, so how much should I be budgeting? Its very hard to say without seeing it and even starting the strip down, Jays car was not too bad as it hasn't been in the UK that long. We were able to reuse most of the parts and it all came apart nicely. Link to comment Share on other sites More sharing options...
Jellybean Posted February 17, 2018 Share Posted February 17, 2018 Lee , what are the bolts on the PHR fuel line brackets M8X15? Link to comment Share on other sites More sharing options...
Samurai 20V Posted February 17, 2018 Share Posted February 17, 2018 Looks gorgeous... Link to comment Share on other sites More sharing options...
blitz01 Posted February 17, 2018 Share Posted February 17, 2018 This is going to be one hell of a supra when done Link to comment Share on other sites More sharing options...
Hammer Posted February 18, 2018 Share Posted February 18, 2018 Seriously great work. So many great builds coming out of your workshop, well done to all concerned. Keep the updates coming. Link to comment Share on other sites More sharing options...
mellonman Posted February 18, 2018 Share Posted February 18, 2018 Fuel tank prepped and cleaned. PHR triple pump hanger built up and installed with walbro 485 pumps Rear fuel lines made up and fitted.https://uploads.tapatalk-cdn.com/20180209/88c5ea3965b78423312d95ab356b30db.jpg https://uploads.tapatalk-cdn.com/20180209/affd5e42a65b1a556dc440b9106b43b6.jpghttps://uploads.tapatalk-cdn.com/20180209/8f248d15e81643e9d59d4b79cdec649c.jpghttps://uploads.tapatalk-cdn.com/20180209/80e229c40d53975d689c43cb35ff5caa.jpghttps://uploads.tapatalk-cdn.com/20180209/aff6307e6b755b569975e80a69aed507.jpghttps://uploads.tapatalk-cdn.com/20180209/7e845c29347b9b98c16c68b3d9a0963e.jpg /QUOTE] How comes the quick release fuel pump connectors , surely they don't fail often enough for this to be a benefit ? Link to comment Share on other sites More sharing options...
Lee P Posted February 18, 2018 Author Share Posted February 18, 2018 How comes the quick release fuel pump connectors , surely they don't fail often enough for this to be a benefit ? Sorry what do you mean? Link to comment Share on other sites More sharing options...
mellonman Posted February 18, 2018 Share Posted February 18, 2018 Sorry what do you mean? /QUOTE] The fuel pumps on the hanger have a connector plug and then a inline crimp , why have the connector plug ? or is it something else ? Link to comment Share on other sites More sharing options...
Lee P Posted February 18, 2018 Author Share Posted February 18, 2018 The fuel pumps on the hanger have a connector plug and then a inline crimp , why have the connector plug ? or is it something else ? Ah sorry, the connector plug comes on the pump so rather than cut it off we just utilise it. Link to comment Share on other sites More sharing options...
DannoSupra Posted February 22, 2018 Share Posted February 22, 2018 Yet another epic build Lee Link to comment Share on other sites More sharing options...
Lee P Posted February 23, 2018 Author Share Posted February 23, 2018 Jay wanted a personal touch on the car so we used the Marbek logo from his clothing brand on the calipers. It required us to strip the calipers, shave the face to remove the original logo. Then repaint and assemble. Subframes installed into the car with HKS coil overs, TRD roll bars and new drop links Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now