squiffy Posted January 9, 2018 Share Posted January 9, 2018 My drivers side window has given up as my regulator tangled itself onto a complete mess. I've ordered a new one and stripped the old one out. Physically changing it isn't a problem, but my question is how do i connect the motor back to the regulator in regards to the up and down position of the window? If I power the motor and press up or down does it run for a set time and stop at it's limit? I've searched the subject and have seen people ask but nobody had answered so any advice would be great! Quote Link to comment Share on other sites More sharing options...
2jzjay Posted January 9, 2018 Share Posted January 9, 2018 Hey If u plug the motor on and press the window switch all the way to the down position, the motor should stop in that positron. Then just offer the motor to the regulator, position the regulator in the down position (compressed) then simply engage the motor on the first notch. Hope that helps! Quote Link to comment Share on other sites More sharing options...
squiffy Posted January 9, 2018 Author Share Posted January 9, 2018 Great! Thanks for the info mate [emoji1360] Quote Link to comment Share on other sites More sharing options...
evinX Posted January 9, 2018 Share Posted January 9, 2018 Mine was off ever so slightly and wouldnt line up. Hooked up and flicked the switch until it did. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.