Cam27 Posted January 3, 2018 Share Posted January 3, 2018 I am sellling the single turbo kit I put together to fit to my car, as I have decided to stick with my hybrid twins. Everything is brand new, except the manifold which i picked up used and is in great condition, and the turbocharger which i had rebuilt and has not been fitted. This is a comprehensive kit and includes everything you need for the turbo system. The kit consists of: HKS T04R Turbocharger. Rebuilt by Liam at Midland Turbo with new seals and bearings, also replaced the compressor wheel with an oversized billet hybrid version, so spool should be very quick. T4 flange, polished compressor housing Whifbitz -4an braided oil feed with goodridge fittings and block adapter, new turbo flange and gasket -10 braided oil return line with Whifbitz billet drain flange and gaskets. Whifbitz twin scroll, twin wastegate tubular manifold. Manifold is in great condition with new DEI titanium heatwrap fitted New OEM manifold gaskets and T4 turbo gasket 2x Turbosmart compgate 40 wastegates. brand new in box with the V band flanges etc. I have one of the screamer pipes as well which i will throw in Suprastore 3" V band downpipe, with boss for wideband sensor. Also the V band clamps and a spare set of 3" V band flanges 4" polished intake pipe with big K&N filter, also black silicone joiner and T bolt clamps Whifbitz polished single turbo FMIC piping, with black silicone joiners and T bolt clamps. K&N IACV breather filter. Funk Motorsports titanium turbo blanket. I also have a 3 row SRD FMIC if necessary. I have loads more pictures and info, so if interested just give me a shout. I am looking for £2750 for everything, which I think is a good price, as it cost me a lot more to put together. I can post, but collection would be preferred as it will weigh a good bit and will need to be insured as well. Thanks Cam Link to comment Share on other sites More sharing options...
Cam27 Posted January 9, 2018 Author Share Posted January 9, 2018 Bump Link to comment Share on other sites More sharing options...
Cam27 Posted January 19, 2018 Author Share Posted January 19, 2018 Bump, price reduced Link to comment Share on other sites More sharing options...
Peter P Posted January 22, 2018 Share Posted January 22, 2018 Looks like a nice kit. Might be worth giving an indication on what horsepower levels can be achieved with this setup? Appreciate there are other factors that need accounting for, but even a ballpark range could help a potential buyer? Seems like a good price for what's included though. Link to comment Share on other sites More sharing options...
kwalker705 Posted January 22, 2018 Share Posted January 22, 2018 is there a connection for an exhaust temp probe on the back runner of the manifold ?? See one pictured in picture 2 . If so is that included in the kit ?? Link to comment Share on other sites More sharing options...
Cam27 Posted January 22, 2018 Author Share Posted January 22, 2018 Looks like a nice kit. Might be worth giving an indication on what horsepower levels can be achieved with this setup? Appreciate there are other factors that need accounting for, but even a ballpark range could help a potential buyer? Seems like a good price for what's included though. Thanks mate, good point. With the right supporting mods HKS rate the turbo to 730whp, this one may be slightly more than that being a hybrid. I was planning to run it around 600-650 which i think would be easily achievable. is there a connection for an exhaust temp probe on the back runner of the manifold ?? See one pictured in picture 2 . If so is that included in the kit ?? Yes there is a connecion on runner 6 for an EGT sensor. The one pictured went with my Syvecs unfortunately, but Whifbitz sell the syvecs inconel EGT sensors for £72 Link to comment Share on other sites More sharing options...
Cam27 Posted January 27, 2018 Author Share Posted January 27, 2018 Now sold. Link to comment Share on other sites More sharing options...
Recommended Posts