Dave Posted December 23, 2017 Share Posted December 23, 2017 What the best paint to use for this as I’m fed up with the Ali going furry all the time ,hamerite ok ? Quote Link to comment Share on other sites More sharing options...
zen Posted December 23, 2017 Share Posted December 23, 2017 I used hammerite and its holding up very well. Used it on my calipers as well. Verzonden vanaf mijn iPhone met Tapatalk Quote Link to comment Share on other sites More sharing options...
Mk4Gaz Posted December 23, 2017 Share Posted December 23, 2017 Depends how good a finish you want. The correct way to do them, is to use an etch primer, and then 2k base and clear. Quote Link to comment Share on other sites More sharing options...
Supra-love Posted December 23, 2017 Share Posted December 23, 2017 VHT high temp is what I’m going to use mate, after a bead blast at work, VHT do nice anodised colours as well. Can get it on the bay for just over £10 a can Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted December 23, 2017 Share Posted December 23, 2017 Depends how good a finish you want. The correct way to do them, is to use an etch primer, and then 2k base and clear. /QUOTE] This man speaks the truth. Both my supras have had them done profesionally this way and zero issues Quote Link to comment Share on other sites More sharing options...
Dave Posted December 24, 2017 Author Share Posted December 24, 2017 Thanks guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.