sunny Posted December 7, 2017 Share Posted December 7, 2017 Hi, Wondering if anyone knows of a decent tuner/mapper in scotland, preferably in/around Glasgow that can map an emanage ultimate for my NA-T project. I have heard Barry at BJF performance in drumchapel has worked on emanage units but just wondering if there are anymore that forum members recommend/know of? Thanks Quote Link to comment Share on other sites More sharing options...
Mr2kyle Posted January 30, 2018 Share Posted January 30, 2018 I know this might be a little late but ra motorsport might be worth a shot.....where I take the mr2 turbo and will be taking the supra once it's ready....just outside of Perth Quote Link to comment Share on other sites More sharing options...
sunny Posted August 13, 2018 Author Share Posted August 13, 2018 I know this might be a little late but ra motorsport might be worth a shot.....where I take the mr2 turbo and will be taking the supra once it's ready....just outside of Perth yea, i just had the car mapped by Russ at RA last friday. Very knowledgeable and friendly guy and made decent numbers too for a NA-T. Quote Link to comment Share on other sites More sharing options...
sidewaysdan Posted August 13, 2018 Share Posted August 13, 2018 What numbers did it make mate.. what else you done to it Quote Link to comment Share on other sites More sharing options...
sunny Posted August 13, 2018 Author Share Posted August 13, 2018 (edited) What numbers did it make mate.. what else you done to it Made 367whp and 344 lb/ft. But maxed out injectors after 6k so had to rev limit it till i get bigger injectors. Its running stock 330s currently. Attached my dyno sheet below Out of the two runs from the dyno sheet, the car is using the map from run 5 which made 363 whp and 339 lb/ft Edited August 13, 2018 by sunny (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.