TBDevelopments Posted November 12, 2017 Share Posted November 12, 2017 I've have these in development for quite a while and i'm finally happy to offer these for sale. They are a cat back system, at 3.5" diameter. Uses 316L Marine Grade Stainless Steel for ultimate corrosion protection, Even the internals of the system are rolled 1.5mm stainless steel and using a Motorsport ceramic muffler wadding. All flange are 10mm Stainless Steel, Laser cut mounting and support brackets. Despite the low price in my opinion this is the best quality exhaust you can buy anywhere on the market. £500.00 Enjoy https://scontent-lht6-1.xx.fbcdn.net/v/t31.0-8/18076908_1850427765220524_4415394493609793693_o.jpg?oh=68246c4257166305429559edc88725cd&oe=5A681042 https://scontent-lht6-1.xx.fbcdn.net/v/t31.0-8/18056419_1850427761887191_452766179529701011_o.jpg?oh=8ee9faf1f7a630949e83ae647af43820&oe=5A95A0DE https://scontent-lht6-1.xx.fbcdn.net/v/t31.0-8/18056049_1850427745220526_7446847789356516936_o.jpg?oh=656ded9b9da9e6b45ae9281667e41f9f&oe=5A666A37 https://scontent-lht6-1.xx.fbcdn.net/v/t31.0-8/18055966_1850427705220530_6861295938389438702_o.jpg?oh=3624b5aeae859220fc3fdc2b91551fbe&oe=5A681BB7 https://scontent-lht6-1.xx.fbcdn.net/v/t31.0-8/18056088_1850427628553871_582419164455571992_o.jpg?oh=94d606d893757d2cb5377fd63b54c101&oe=5A9508E2 https://scontent-lht6-1.xx.fbcdn.net/v/t1.0-9/12729215_1669230130006956_2322270752168298703_n.jpg?oh=3dc89005caf82bcab268bea3da584d24&oe=5A62B95A https://scontent-lht6-1.xx.fbcdn.net/v/t31.0-8/10636590_1669230183340284_325970463697338291_o.jpg?oh=e22ada72853d624fb38670d5747c9be1&oe=5AA21D29 Link to comment Share on other sites More sharing options...
muckyman Posted November 12, 2017 Share Posted November 12, 2017 Got a sound clip video? Link to comment Share on other sites More sharing options...
TBDevelopments Posted November 12, 2017 Author Share Posted November 12, 2017 its been raining today so when its dry i'll get a video and a DB level on idle and 3k. if you want a first hand account of this system "BURNA" had a lift home in it the other night. and i was showing it off at the wroxhall event. Link to comment Share on other sites More sharing options...
mellonman Posted November 12, 2017 Share Posted November 12, 2017 might be good if you could also do a 3/4 throttle db for track day porpose Link to comment Share on other sites More sharing options...
TBDevelopments Posted November 12, 2017 Author Share Posted November 12, 2017 ok at the moment i know its a little less than a 3" nurspec Link to comment Share on other sites More sharing options...
ShawnPreece Posted November 13, 2017 Share Posted November 13, 2017 I've heard this on Tim's car and thought it sounded great Link to comment Share on other sites More sharing options...
Burna Posted November 13, 2017 Share Posted November 13, 2017 if you want a first hand account of this system "BURNA" had a lift home in it the other night. and i was showing it off at the wroxhall event. Yep, had a lift home last week in Tims car, and I must say the exhaust did surprise me. He didn't open the car up, but just a leisurely 30 minute drive on a mixture of country roads and traffic, and the exhaust is very nice. A nice gentle rumble to let you know it's there, but no drone or anything that bought your attention to the fact you had an aftermarket exhaust. Link to comment Share on other sites More sharing options...
bayside_supra Posted November 13, 2017 Share Posted November 13, 2017 Any plans for a 4”? Link to comment Share on other sites More sharing options...
TBDevelopments Posted November 13, 2017 Author Share Posted November 13, 2017 thanks guys. not at the moment buddy, 3.5" is large enough for 95% of the performance builds and still gives great ground clearances. Link to comment Share on other sites More sharing options...
TBDevelopments Posted November 16, 2017 Author Share Posted November 16, 2017 Not the best videos as its from my phone, sounds deeper in person. But you get an idea and using a cheap DB meter Cold Start Idle is around 1000-1200RPM Revving, i hold it at 3000rpm, and then give it a few blips upto around 5000rpm. I can do a video in car as well if people are interested. Tim TB Developments Link to comment Share on other sites More sharing options...
muckyman Posted November 16, 2017 Share Posted November 16, 2017 Cold Start Idle [/url] Link not working for me :-( ....but I got to it via your Facebook link.. :-) Link to comment Share on other sites More sharing options...
TBDevelopments Posted November 16, 2017 Author Share Posted November 16, 2017 give me a minute i've made a youtube account so i've uploaded them there. This computer lark is a bit new to me haha Link to comment Share on other sites More sharing options...
TBDevelopments Posted November 16, 2017 Author Share Posted November 16, 2017 think there all working now. any issues people let me know Link to comment Share on other sites More sharing options...
Recommended Posts