AC93 Posted September 23, 2017 Share Posted September 23, 2017 Hi, So after getting my shiny new wheels refurbed and wrapped in expensive new rubber it was time for wheel alignment. Front was a-okay to adjust but the rear camber/toe bolts are seized! Bushes will be ruined once cut out so just going to replace them, I have the bolts/washers etc. But does anyone have part numbers or a link to the arms that are used to adjust the rear camber and toe? Thanks, Link to comment Share on other sites More sharing options...
Westy Posted September 23, 2017 Share Posted September 23, 2017 Is it the rear lower arms? If so the numbers have been superseeded but they are still available. I checked last week. Link to comment Share on other sites More sharing options...
AC93 Posted September 23, 2017 Author Share Posted September 23, 2017 Is it the rear lower arms? If so the numbers have been superseeded but they are still available. I checked last week. I think it is these, will wait for someone to confirm or call Toyota on Monday in the a.m. Link to comment Share on other sites More sharing options...
Westy Posted September 23, 2017 Share Posted September 23, 2017 They aren't cheap. Make sure your sitting down. I have two sets laying spare as they are prone to seizing Link to comment Share on other sites More sharing options...
AC93 Posted September 23, 2017 Author Share Posted September 23, 2017 They aren't cheap. Make sure your sitting down. I have two sets laying spare as they are prone to seizing I know.. On Whifbitz they're £260 each side Link to comment Share on other sites More sharing options...
Sheefa Posted September 23, 2017 Share Posted September 23, 2017 (edited) 48730-14040 48740-14070 I got the above rear lower arms from TCB parts back in January and yes they were £248 each direct from Japan 2 weeks delivery. Here are the part numbers for nuts and adjusters too 48710P Nut No2 rear lower control arm 48710N Nut No1 rear lower control arm 48194H Cam rear suspension camber adjust No2 RH 48198R Cam rear suspension camber adjust No2 LH Edited September 23, 2017 by Sheefa (see edit history) Link to comment Share on other sites More sharing options...
AC93 Posted September 23, 2017 Author Share Posted September 23, 2017 (edited) Thanks Sheefa ..I have the bolts/washers/nuts for the camber and toe adjuster I think these are the arms I need Edited September 23, 2017 by AC93 (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now