Wonga Spar Posted September 19, 2017 Share Posted September 19, 2017 Hi Fellas, Seems like this is a somewhat common problem, but can't find any straight answers from searching- so here goes. Today re-fitted the dash in a hurry, noticed the indicators and hazards have stopped working. Anybody know what that normally means? I've double-checked the connector is in for the hazards but it's possible I've buggered it Quote Link to comment Share on other sites More sharing options...
Cam27 Posted September 19, 2017 Share Posted September 19, 2017 This happened to me once, i forgot to reconnect the plug at the top behind the center dash panel, try double checking that? Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted September 19, 2017 Share Posted September 19, 2017 Yer check the hazard switch connection, I also had an issue once where a wire was trapped under the battery causing the issue Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.