walkerstrider Posted September 16, 2017 Share Posted September 16, 2017 As above. Xs power intake with throttle body. Needs a good polish to get rid of surface scratches. Was gonna use but doesn't clear my abs. 90 quid plus delivery Link to comment Share on other sites More sharing options...
sidewaysdan Posted September 17, 2017 Share Posted September 17, 2017 Is this for a na-t ? Any pics Link to comment Share on other sites More sharing options...
walkerstrider Posted September 17, 2017 Author Share Posted September 17, 2017 [ATTACH=CONFIG]222389[/ATTACH] Yes for na-t mate. Will need new gasket and mounting bolts. Link to comment Share on other sites More sharing options...
sidewaysdan Posted September 17, 2017 Share Posted September 17, 2017 Does it have the weld lugs in for the sensors? Link to comment Share on other sites More sharing options...
walkerstrider Posted September 17, 2017 Author Share Posted September 17, 2017 Sold Link to comment Share on other sites More sharing options...
sidewaysdan Posted September 17, 2017 Share Posted September 17, 2017 Dam it . I new I should but first and ask questions later .. Link to comment Share on other sites More sharing options...
goldenvtr Posted September 19, 2017 Share Posted September 19, 2017 Bit of advice for anyone who gets one of these. Get it welded to your lower runners. So much better. Also need a idle valve flange and throttle cable bracket welding on. Took me quite alot of fabrication and relocation to get it to fit but worth it Link to comment Share on other sites More sharing options...
Recommended Posts