Sheefa Posted September 3, 2017 Share Posted September 3, 2017 (edited) Hi all Off to Greg @ ProTuner tomorrow for some mapping and tweaks. Lee @ SRD mapped the car last year at Abbey Motorsport and it's been ace but for some reason traction control hasn't been working despite passing ABS diagnostics test and speed sensors working fine. Greg is local and knows his stuff so hoping he can resolve. Also having a few tweaks to the maps and Toucan positions as well on the fly antilag. Not planning on making any more power than the 753rwhp with 50% ethanol mix, we'll see how she's goes though! Sorting restriction in exhaust so 4" all the way from turbo and a better intake pipe with filter located out of direct engine bay. Wish me luck and numbers to follow [emoji6] Greg Full spec: Engine Fully Built and balanced engine & Head with less than 20k miles HKS (Carrillo) rods Oversize CP Piston and Ring Set (3.1 litres) New crank (sub 10,000 miles) SRD Stage 2 Cams 269 Ferrea Ti retainers Polished Q45 throttle body SRD Greddy style intake manifold Polished cam covers Engine Components NEW Fluidampr Crank Pulley SRD/Powerhouse Racing Polished Alloy pulleys Gates Racing Kevlar Cam belt New Toyota Timing Pulley New Toyota Belt Idler PHR Idler Pulley Modifed oil pump. Single Turbo Kit Precision Turbo Billet CEA Gen 2 6466 900HP Turbocharger Powerhouse Racing Stage 3 HKS ceramic coated manifold New SRD turbo oil line kit DEI T4 Titanium Turbo Blanket DEI Titanium Heat wrapped PHR 4” ceramic coated downpipe/midpipe Dual HKS BOV’s Fuel System New ASNU 1100cc Fuel injectors New Custom Teflon Fuel lines New Twin Walbro 485 pumps Powerhouse Racing Fuel Rail Aeromotive Fuel Pressure Regulator Exhaust Veilside 4" Pearldrop Titanium 3.5" Exhaust (with optional bung) Double Decat Pipes Cooling GReddy 4row Intercooler with hardpipes 10 row power steering cooler 16 row Oil Cooler New Rear diff cooler Custom Airbox PWR Polished Aluminium Radiator with twin electric fans (ECU Controlled) Electronics and control Battery relocation to boot with full wiring^ Syvecs S6 ECU (Tuned by Ryan@2BAR) Syvecs Toucan Controller Syvecs Innovate Motorsports Wideband (ECU Connected) Syvecs Oil Temp sensor (ECU monitored) New Fuel flex Sensor & Ethanol Syvecs Fuel pressure sensor (ECU monitored) New Coil packs Syvecs Enhanced Knock sensors (ECU monitored) Syvecs Oil pressure probe (ECU monitored) Boost control valve (ECU controlled and monitored) Laser Line Cat 1 Thatcham approved Car alarm Transmission Stock Getrag V160 6 speed Manual New OS Gilken LSD Large Case Differential and new seals/bushes RPS Streetmax Clutch (temp until RPS Carbon arrives thanks to Shawn Preece!) AP Engineering Shifter Bushing Kit Modified clutch slave cylinder & braided line Suspension New HKS HyperMax IV Suspension (Awesome ride and comfort, fully adjustable) TRD Anti-roll bars Full Geometry setup completed at fitment by SRD in November 2015 Wheels & Braking 18” CCW Classic Wheels with chrome lip and Matt centre finish complete with custom caps Toyo Proxe T1-R tyres Upgraded steering rack bushes UK Spec brakes (newly rebuilt with seals, boots and Pistons) with full braided stainless hoses, new stock discs and Porterfield Fast Road Pads all round New OEM brake lines. Interior TRD 10K tech Speedo Toyota Celica steering wheel and ABS connector MVP Aluminium pedals MVP Aluminium dial surround Sparco Milano Prestige leather seats Bride seat rails Leather gear and handbrake covers Pioneer Double DIN DVD, Ipod and MP3 head unit^ Kenwood lightweight speakers. Bodywork Stock OEM bodywork Whifbitz lower lip with 2” hose pickups LED Facelift Front Indicators Clear Side Repeaters Facelift Rear Lights^ Bespoke LED Halo Ring Facelift Headlights Other Fancy bits Carbon Fibre Engine Cover Carbon Fibre Engine Bay Boxes SRD Aluminium Engine Under tray SRD cooling plate Aluminium Rad overflow tank Chromed Top radiator hard pipe Whifbitz carbon fibre bonnet dampers Power Currently 753rwhp at 2 bar on ethanol (670rwhp on pump fuel)^ Edited September 3, 2017 by Sheefa (see edit history) Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted September 4, 2017 Share Posted September 4, 2017 Good luck mate keep us updated Quote Link to comment Share on other sites More sharing options...
Big Mark Posted September 4, 2017 Share Posted September 4, 2017 (edited) Hey mate, I hope it all goes well. My car is in there next to the dyno at present for loom and then mapping. I'll pop down after work and say HI as only 10 mins from work anyway. Oh and if you want to kill some time whilst waiting there is a really good gym around the corner too. Edited September 4, 2017 by Big Mark (see edit history) Quote Link to comment Share on other sites More sharing options...
Josh42 Posted September 4, 2017 Share Posted September 4, 2017 Good luck Greg, keep us posted Quote Link to comment Share on other sites More sharing options...
Stonkin Posted September 4, 2017 Share Posted September 4, 2017 Best of luck for today Greg Quote Link to comment Share on other sites More sharing options...
Style Posted September 4, 2017 Share Posted September 4, 2017 Good luck mate! Quote Link to comment Share on other sites More sharing options...
Andrew K Posted September 4, 2017 Share Posted September 4, 2017 Best of luck hope all goes well. Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted September 4, 2017 Share Posted September 4, 2017 All the best Greg! Keep us updated. Quote Link to comment Share on other sites More sharing options...
Cam27 Posted September 4, 2017 Share Posted September 4, 2017 Good luck mate, hope it goes well! Quote Link to comment Share on other sites More sharing options...
Rob W Posted September 4, 2017 Share Posted September 4, 2017 Best of luck mate Quote Link to comment Share on other sites More sharing options...
mplavery Posted September 4, 2017 Share Posted September 4, 2017 Good luck mate !! Quote Link to comment Share on other sites More sharing options...
Sheefa Posted September 4, 2017 Author Share Posted September 4, 2017 Thanks gentlemen. All good so far with compression and leak test Quote Link to comment Share on other sites More sharing options...
Sheefa Posted September 4, 2017 Author Share Posted September 4, 2017 Good! Quote Link to comment Share on other sites More sharing options...
jjs_82 Posted September 4, 2017 Share Posted September 4, 2017 Any news. Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted September 4, 2017 Share Posted September 4, 2017 Hope all is going well dude Quote Link to comment Share on other sites More sharing options...
Sheefa Posted September 4, 2017 Author Share Posted September 4, 2017 Literally just about to start mapping! Two boost leaks sorted with Greddy manifold and BOV and intercooler pipe by turbo but all good and now the fun begins. Thanks all. Quote Link to comment Share on other sites More sharing options...
X13mgr Posted September 4, 2017 Share Posted September 4, 2017 Videos Greg. Quote Link to comment Share on other sites More sharing options...
berg Posted September 4, 2017 Share Posted September 4, 2017 Hope all goes well Mine was still being mapped at 1am lol You're in safe hands though, need to get mine back in soon as it's in need of a tweek now with all the recent changes Quote Link to comment Share on other sites More sharing options...
Sheefa Posted September 4, 2017 Author Share Posted September 4, 2017 Think Greg is going to be there very, very late! [emoji50][emoji50] No news yet...... Quote Link to comment Share on other sites More sharing options...
Wez Posted September 5, 2017 Share Posted September 5, 2017 Any news? Quote Link to comment Share on other sites More sharing options...
Sukhy Posted September 5, 2017 Share Posted September 5, 2017 Good luck. Hope all goes well. Videos here are well received Quote Link to comment Share on other sites More sharing options...
Sheefa Posted September 5, 2017 Author Share Posted September 5, 2017 He hasn't started yet as he was sorting a skyline last night still [emoji23] It's in the dyno now! Vids to follow. Quote Link to comment Share on other sites More sharing options...
Sheefa Posted September 5, 2017 Author Share Posted September 5, 2017 The warm-up....... Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted September 5, 2017 Share Posted September 5, 2017 good luck dude, watching with interest Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted September 5, 2017 Share Posted September 5, 2017 What's this the worlds longest mapping session? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.