bobapple Posted July 9, 2017 Share Posted July 9, 2017 Morning so I have come to fit my zunsport grille following instructions I have removed the top and lower strips from the bumper but when I have come to fit their is 2 plastic lugs on the lower stiffening strip which seem to be right where the beackets are on the grill, before I go hacking these lugs off has anyone come across this before and any tips? Thanks in advance. Link to comment Share on other sites More sharing options...
rider Posted July 9, 2017 Share Posted July 9, 2017 I had the garage fit mine as easiest done with a ramp and they said eazy pezy fit which I cannot imagine meant cutting anything. I have a stock bumper. Link to comment Share on other sites More sharing options...
Spunkmeyer Posted July 9, 2017 Share Posted July 9, 2017 Aren't the clips able to be pulled off and repositioned elsewhere around the grille? Link to comment Share on other sites More sharing options...
ripped_fear Posted July 9, 2017 Share Posted July 9, 2017 If your referring to a face-lift centre bar I think they don't fit without some modding Link to comment Share on other sites More sharing options...
bobapple Posted July 9, 2017 Author Share Posted July 9, 2017 (edited) Hi all no it's a prefacelft bumper basically on the black strip on the bottom side of the mouth in the bumper I think it's a stiffening strip, it screws on but their is also 2 plastic clips and on the grill their are 2 like hook brackets and basically these clips are slap bang where the hooks wanna be I will try to upload a pic. Edited July 9, 2017 by bobapple (see edit history) Link to comment Share on other sites More sharing options...
bobapple Posted July 9, 2017 Author Share Posted July 9, 2017 Here you can see the bracket sits directly underneath the plastic clip Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now