griffsplace Posted June 22, 2017 Share Posted June 22, 2017 Hi, In removing the perished boot lid blocks and badly corroded screws, the screw heads are a right mess. Can anyone tell me what thread size they are and I can get some from a local supplier. The larger bolts from the lid blocks are actually ok, its the lower blocks connected to the body, 2 screws per block, that I need to replace. Link to comment Share on other sites More sharing options...
clay Posted June 22, 2017 Share Posted June 22, 2017 i think your find they are m6x20 socket head screws. get stainless steel ones if you can Link to comment Share on other sites More sharing options...
suprasurrey Posted June 22, 2017 Share Posted June 22, 2017 I changed mine to M5 x 16 socket cap head screw + M5 spring washer (4 off each to do both sides). As mentioned, use stainless steel if possible. My original screws were stuck, so I cut the rubber off and used a combination of gentle heat and a pair of water pump pliers to get them out. Good luck;) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now