Chris Wilson Posted June 9, 2017 Share Posted June 9, 2017 Profit margin? Maybe using a commercial pump, rather than what I believe was his own design in the old kits, is more profitable, but needs outside control? I am going to do the analogue to digi converters as I have bought the bits. I just need time.... Link to comment Share on other sites More sharing options...
_Shane_ Posted June 9, 2017 Author Share Posted June 9, 2017 Mapping wont be going ahead this weekend as from what i have heard the garage caught fire yesterday and is no more. Booked in for mapping with another tuner for the 24th this month, will update when mapping is done Link to comment Share on other sites More sharing options...
jjs_82 Posted June 9, 2017 Share Posted June 9, 2017 Good job your car was not in it Link to comment Share on other sites More sharing options...
bignum Posted June 9, 2017 Share Posted June 9, 2017 Another garage burnt down, is this becoming a regular thing? Link to comment Share on other sites More sharing options...
_Shane_ Posted June 9, 2017 Author Share Posted June 9, 2017 Ya mate i know, that is what one of the lads said, haunted your car wasnt there I have not heard anymore or seen any pics of the damage but from what people said to me its not a pretty scene Link to comment Share on other sites More sharing options...
Jellybean Posted June 9, 2017 Share Posted June 9, 2017 Ya mate i know, that is what one of the lads said, haunted your car wasnt there I have not heard anymore or seen any pics of the damage but from what people said to me its not a pretty scene What place was it Shane? Link to comment Share on other sites More sharing options...
Jellybean Posted June 9, 2017 Share Posted June 9, 2017 I used to use and fit a lot of the basic Aquamist kits, that ran a pressure switch, a relay and a pump. Very simple, and reliable. They then constantly brought out more and more complex kits with their own "ECU" control. For 90% of people with road cars these are OTT and expensive, and need hacking into factory injector and ecu wiring, which is always a bit of a kludge, even when done neatly, but I believe the old basic kit is no more. The new kits use a HUGE pump that to me looks just like the crop sprayer pump I use on the tractor... But at several times the price With WI you just need something straightforward that pumps water in at over say 0.9 to 1.2 bar of boost. Thats the problem, the Aquamist kits are $$$$ now , maybe AEM is a good choice The Motec has provisions in the Supra package to run WI Link to comment Share on other sites More sharing options...
_Shane_ Posted June 28, 2017 Author Share Posted June 28, 2017 Forgot to update this On first run at 0.6 bar boost the car made 411bhp Just waiting for final mapping to be done and will update when i get that figure Link to comment Share on other sites More sharing options...
bignum Posted June 28, 2017 Share Posted June 28, 2017 How did they get the boost so low? Link to comment Share on other sites More sharing options...
_Shane_ Posted June 28, 2017 Author Share Posted June 28, 2017 Wastegate spring is 0.6 bar mate Link to comment Share on other sites More sharing options...
SupraLEDrears Posted June 28, 2017 Share Posted June 28, 2017 Forgot to update this On first run at 0.6 bar boost the car made 411bhp Just waiting for final mapping to be done and will update when i get that figure Thats promising numbers on 95 Link to comment Share on other sites More sharing options...
_Shane_ Posted June 28, 2017 Author Share Posted June 28, 2017 Will see what it makes and then how the car drives when its all done and dusted, can always do a forged build next year or else swap out the T51 for something a bit smaller Link to comment Share on other sites More sharing options...
berg Posted June 28, 2017 Share Posted June 28, 2017 Are you planning to use a stiffer spring? Rule of thumb normally max boost is 2x the wastegate spring rate so youd only be able to run 1.2 bar ish Link to comment Share on other sites More sharing options...
_Shane_ Posted June 28, 2017 Author Share Posted June 28, 2017 That is roughly all we were planning on running anyway with stock bottom end and 95 octane fuel Link to comment Share on other sites More sharing options...
jjs_82 Posted June 29, 2017 Share Posted June 29, 2017 Any news for us today Link to comment Share on other sites More sharing options...
_Shane_ Posted June 29, 2017 Author Share Posted June 29, 2017 Oil return line came off while on the dyno so everything was stopped, new line been fitted in the morning When i get an update i will post on here Link to comment Share on other sites More sharing options...
_Shane_ Posted June 30, 2017 Author Share Posted June 30, 2017 Car was back on the dyno today and mapping was finished Final result - 623bhp @ 1.1 bar Link to comment Share on other sites More sharing options...
Jamesy Posted June 30, 2017 Share Posted June 30, 2017 Very decent mate Link to comment Share on other sites More sharing options...
_Shane_ Posted June 30, 2017 Author Share Posted June 30, 2017 Thanks James, I am looking forward to driving it when its back Link to comment Share on other sites More sharing options...
jjs_82 Posted July 1, 2017 Share Posted July 1, 2017 That's good power from 95 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now