brom86 Posted June 7, 2017 Share Posted June 7, 2017 Has anyone fitted facelift side indicators on a pre facelift bumper? My facelift car has a pre facelift bumper which am looking to convert fully. I have the grill bar and side indicators purchased and the looms are still behind the bumper. Am basically looking to see how hard it is to cut into the bumper and what the measurements are for it Quote Link to comment Share on other sites More sharing options...
jim Posted June 7, 2017 Share Posted June 7, 2017 If you don't get sorted this afternoon, remind me on fb messenger later bud, I'll take some pics of the holes behind the side repeaters and try to get some approximate measurements too. I imagine you'd probably just need to mask the area with some white tape, draw the shape you want to cut and then use a dremel to cut it out. Quote Link to comment Share on other sites More sharing options...
brom86 Posted June 7, 2017 Author Share Posted June 7, 2017 If you don't get sorted this afternoon, remind me on fb messenger later bud, I'll take some pics of the holes behind the side repeaters and try to get some approximate measurements too. I imagine you'd probably just need to mask the area with some white tape, draw the shape you want to cut and then use a dremel to cut it out. Aw your a gentleman jim thanks very much for that. That's exactly what am looking for 🖒 Quote Link to comment Share on other sites More sharing options...
Rob W Posted June 7, 2017 Share Posted June 7, 2017 On the passenger side, you can pull the loom back to the front of the arch from the where the pre-facelift side indicator is. Just have to take out the arch liner and plastic loom cover. Drivers side, same as above but you have to extend one of the two the pre-facelift side indicator cables. I did mine this way as I didn't like the idea of the pre-facelift side indicator loom just sitting behind the wing doing nothing, think its the better way to do it. Quote Link to comment Share on other sites More sharing options...
brom86 Posted June 7, 2017 Author Share Posted June 7, 2017 On the passenger side, you can pull the loom back to the front of the arch from the where the pre-facelift side indicator is. Just have to take out the arch liner and plastic loom cover. Drivers side, same as above but you have to extend one of the two the pre-facelift side indicator cables. I did mine this way as I didn't like the idea of the pre-facelift side indicator loom just sitting behind the wing doing nothing, think its the better way to do it. It's a facelift car I have. Wings are facelift it's just the front bumper that needs holes cut into the side Quote Link to comment Share on other sites More sharing options...
Rob W Posted June 7, 2017 Share Posted June 7, 2017 It's a facelift car I have. Wings are facelift it's just the front bumper that needs holes cut into the side /QUOTE] Totally ignore then I assumed not having a facelift front bumper fitted it was a pre-facelift, serves me right for not reading the first post properly! Quote Link to comment Share on other sites More sharing options...
brom86 Posted June 7, 2017 Author Share Posted June 7, 2017 Totally ignore then I assumed not having a facelift front bumper fitted it was a pre-facelift, serves me right for not reading the first post properly! Haha that's ok mate Quote Link to comment Share on other sites More sharing options...
mike33 Posted June 7, 2017 Share Posted June 7, 2017 (edited) Hello matey I put these on a facelift bumper when I took mine off I had taken a measurements off a facelift so I could see where to put them but inside the bumper was already marks of where they go! And this surprised me!! This was a 94 l reg! Edited June 7, 2017 by mike33 (see edit history) Quote Link to comment Share on other sites More sharing options...
brom86 Posted June 7, 2017 Author Share Posted June 7, 2017 Hello matey I put these on a facelift bumper when I took mine off I had taken a measurements off a facelift so I could see where to put them but inside the bumper was already marks of where they go! Ahh surprised me!! This was a 94 l reg! Oh is that right I'll need to have a look Quote Link to comment Share on other sites More sharing options...
mike33 Posted June 7, 2017 Share Posted June 7, 2017 So that is supposed to read prefaclift at the beginning! Quote Link to comment Share on other sites More sharing options...
jim Posted June 7, 2017 Share Posted June 7, 2017 Hopefully these are of use, I'll send you them separately too Craig if you need more/better pics (seems Mrs Jim picked up her skills at the Jazz School of Photography) let me know bud Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.