Gpro Posted May 2, 2017 Share Posted May 2, 2017 I'm about to purchase some conrods, but can't decide between the following two Brian Crower Heavy Duty H-Beam rods with 625+ bolts Manley H-Tuff H-Beam rod with 625+ bolts I'm looking for 1000-1000rwhp max and around 8,500rpm (hence the 625+ bolts). Any advice would be much appreciated. Quote Link to comment Share on other sites More sharing options...
markssupra Posted May 3, 2017 Share Posted May 3, 2017 I'm running Brian Crower rods with ARP bolts, rated to 300 per cylinder IIRC Still need to get mine mapped by SRD, but Lee estimates 800 rwhp with my big twin setup Quote Link to comment Share on other sites More sharing options...
Lee P Posted May 3, 2017 Share Posted May 3, 2017 Either of those are a good choice and will do the power no problem I'm about to purchase some conrods, but can't decide between the following two Brian Crower Heavy Duty H-Beam rods with 625+ bolts Manley H-Tuff H-Beam rod with 625+ bolts I'm looking for 1000-1000rwhp max and around 8,500rpm (hence the 625+ bolts). Any advice would be much appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.