2jz fuel injector recomendations for high power

[jonny mac]

hi guys, I'm looking for some advice from those of you using large cc fuel injectors

 

they need to be top feed 14mm top and bottom, 60mm length

 

here's the spec of my car:

1jz head, non vvt, massive port job done

264 bc cams, bc springs and retainers

 

2jz block

forged pistons and rods (20cc)

 

6 boost manifold and a gtx3582r turbo, t3 divided collector, .8 exh housing into 3" v band and 3" exhaust

 

hypertune style intake with 90mm throttle body and 3" cooler/pipes

 

 

basically I'm looking to make a bucket load of power at 2 bar, turbo rated to 650bhp but I reckon I could make more

 

I'm using link g4 ecu stand alone so it doesn't matter if they are high or low impedance,

 

I have two bosch 044 fuel pumps and a walbro lift pump to swirl pot so fuel pressure isn't an issue

 

 

I've been looking at injector dynamics 1050x new style injectors?

 

what do you all use/power do you make at what duty cycle ?

 

and where did you get them? and what would people recommend, this is my last piece of the puzzle in my build so I'm more than happy to wait for the right thing

[Lee P]

We use Asnu injectors which work really well and are bosch based

 

1100cc would be my recommendation and we can supply these

[jonny mac]

what price are you for 6 with plugs/pig tails?

 

I've found injector dynamics id1050x for £600 delivered online so far

[Lee P]

what price are you for 6 with plugs/pig tails?

 

I've found injector dynamics id1050x for £600 delivered online so far

 

Around £700 for the asnu with every thing to fit them

[jcbt]

Around £700 for the asnu with every thing to fit them

 

And worth every penny if you want a superior performing injector on a high horse power build