SUPRA4EVA Posted April 3, 2017 Share Posted April 3, 2017 I want to remove and blank my UK Spec lamp washer holes but I don't want to fill the holes permanently, I just want them off so they don't get damaged. I really like them but read that they are impossible to get a hold of. Just looking for something like blanking plates, I'd love it to be flush but the cracking and discoloration around the washers will look bad. I doubt I'll find a front JDM bumper in good condition already finished in 040 White... Link to comment Share on other sites More sharing options...
evinX Posted April 3, 2017 Share Posted April 3, 2017 Get some acrylic card, 3-4mm...cut it to the shape of the holes, paint them up nicely, duct tape behind the bumper hole and stick ontop. will be clean and easily reversible. make sure and cut the peices nice and clean, sand the edges smooth. You can bend the card to get the contour of the bumper to. Can get acrylic card of ebay for like quid delivered in a4 size. And duct tape Link to comment Share on other sites More sharing options...
HarleyFDMD Posted April 3, 2017 Share Posted April 3, 2017 Or you could swap bumpers with me? I have a white jspec front bumper in very good condition structurally. It would want a respray though Link to comment Share on other sites More sharing options...
Sheefa Posted April 3, 2017 Share Posted April 3, 2017 Why blank them? The washers look fine and are unique! Link to comment Share on other sites More sharing options...
SUPRA4EVA Posted April 3, 2017 Author Share Posted April 3, 2017 Why blank them? The washers look fine and are unique! /QUOTE] I know, I have no problem with them! But if they get ripped off (I've had my mirrors kicked in before on other car) I'll never find a replacement, see where I'm coming from? Link to comment Share on other sites More sharing options...
SUPRA4EVA Posted April 3, 2017 Author Share Posted April 3, 2017 HarleyFDMD, I actually want to keep my UK Spec bumper ether on or off, I would not be concerned for the washers if passers by could be trusted... Link to comment Share on other sites More sharing options...
ShawnPreece Posted April 4, 2017 Share Posted April 4, 2017 Id agree with Greg (Sheefa) and keep them on, if you dont like them then thats fair enough and personal taste but aslong as you like them then id say use them no use preserving them for someone else to use when you can be using them yourself Link to comment Share on other sites More sharing options...
Burna Posted April 4, 2017 Share Posted April 4, 2017 Why blank them? The washers look fine and are unique! /QUOTE] I knew there was a reason I liked you lol Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now