Supra-love Posted March 30, 2017 Share Posted March 30, 2017 Fitted a genuine hks bov today but doesn't dump at all. Added a pic of the setup. Running with a standard intake and turbos on syvecs. Any help would be great.. I assume I've fitted it correctly? Quote Link to comment Share on other sites More sharing options...
X13mgr Posted March 30, 2017 Share Posted March 30, 2017 Ye it's fitted like mine. Maybe it's abit old and sticking? Quote Link to comment Share on other sites More sharing options...
Supra-love Posted March 30, 2017 Author Share Posted March 30, 2017 Ye it's fitted like mine. Maybe it's abit old and sticking? [ATTACH=CONFIG]217867[/ATTACH] I've taken the casing off, and the middle pushes back and doesn't feel mega stiff or anything... if it is sticking is there anyway to free that up more? Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 30, 2017 Share Posted March 30, 2017 I'm pretty sure on the older versions you can adjust the spring through a small screw on rear of housing. Have you done this? What fin is in the middle? Quote Link to comment Share on other sites More sharing options...
Supra-love Posted March 30, 2017 Author Share Posted March 30, 2017 I'm pretty sure on the older versions you can adjust the spring through a small screw on rear of housing. Have you done this? What fin is in the middle? /QUOTE] Agh I haven't adjusted that mate. Do I just tighten it or? It's the standard silver fin! Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 31, 2017 Share Posted March 31, 2017 Yes you should feel the spring adjust by turning it anti/clockwise. Can't remember which as had one on old car. Quote Link to comment Share on other sites More sharing options...
Ric Posted March 31, 2017 Share Posted March 31, 2017 have you used the bottom of a walking stick to blank the oem box pipe? Quote Link to comment Share on other sites More sharing options...
CarlT67 Posted March 31, 2017 Share Posted March 31, 2017 have you used the bottom of a walking stick to blank the oem box pipe? Certainly looks like it Quote Link to comment Share on other sites More sharing options...
fastcar Posted March 31, 2017 Share Posted March 31, 2017 Looks like the bolt on the back needs to be loosened off. I had an HKS 1st gen and the bolt on the back was out about 15-20mm Quote Link to comment Share on other sites More sharing options...
Supra-love Posted March 31, 2017 Author Share Posted March 31, 2017 Yea I used a walking stick bottom... lol Also tried adjusting the nut but nothing still.. In a bigger note hit boost earlier and engine completely died. Now won't start, but cranks over and goes to fire but nothing. Spent 4hours waiting for recovery for recovery..., Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.