Jellybean Posted March 18, 2017 Share Posted March 18, 2017 (edited) Lights on the Heater control are flickering , the unit it self is flicking between Recirculation and Non-recirculation (symbol above) Inside the cabin it is extremely hot all the time as if it is set to max temp, intermittently dimmer lights are coming on/off Fan and LEDS on the switch work as expected Will verify the internal Thermostat is hooked up , but any idea's , did not come across anything on here Common they need re-soldering ? Edited March 18, 2017 by Jellybean (see edit history) Quote Link to comment Share on other sites More sharing options...
Sheefa Posted March 18, 2017 Share Posted March 18, 2017 Send it off for a nice LED upgrade like me mate! I had some issues with LEDs with lights on but worked fine when off oddly. Must be a diode or something. Quote Link to comment Share on other sites More sharing options...
Jellybean Posted March 18, 2017 Author Share Posted March 18, 2017 Yeah Think it's just solder is old I wonder does Heckler still do them Quote Link to comment Share on other sites More sharing options...
evinX Posted March 19, 2017 Share Posted March 19, 2017 The connections on the board can sometimes burn out, id open it up, bridge any connections with thin wire to fix it if it has, seen this a few times including my own. Previous owner wired a seperate switch for AC, my dad opened it up and the AC connector burnt out. Easy fix Quote Link to comment Share on other sites More sharing options...
Jellybean Posted March 19, 2017 Author Share Posted March 19, 2017 block connector was not full pressed in , doh Few bulbs are gone though and need some new block connectors , plastic clip has lost its tension , bitch to get out Will just get heckler to do led conversion on the unit and centre cluster over the winter Thanks for the help! Quote Link to comment Share on other sites More sharing options...
evinX Posted March 27, 2017 Share Posted March 27, 2017 (edited) wrong post Edited March 27, 2017 by evinX (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.