chilli Posted February 17, 2017 Share Posted February 17, 2017 As a matter of routine service I want to drain coolant and refill. I see there's a block drain plug. However if I touch it I presume there is a chance of a leak afterwards. Is there an o-ring on it? Anyone got the size/spec or point me at part no, presume I'd only get the Toyota part from local Toyota garage? 2JZ-GTE TT 96 pre-vvti Thanks! Link to comment Share on other sites More sharing options...
Dnk Posted February 17, 2017 Share Posted February 17, 2017 (edited) http://www.mkivsupra.net/vbb/content.php?60-Cooling-System 2nd page down I didn't touch that drain plug, just drop the bottom rad hose off and pop the stat out, if its an old stat i'd be replacing it for what they cost. What state is the coolant in ? it would pay to flush the system through before re filling, heater matrix tend to slowly fill with crud Edited February 17, 2017 by Dnk (see edit history) Link to comment Share on other sites More sharing options...
chilli Posted February 17, 2017 Author Share Posted February 17, 2017 Ahah good idea, sounds simpler and less hassle. Coolant /system seems great, no issues. But for anti-corrosion I'd like to replace the coolant fluid. Got the Toyota Red for it, I know some people prefer others but I've literally never had any trouble with it. Link to comment Share on other sites More sharing options...
Lee P Posted February 17, 2017 Share Posted February 17, 2017 No oring on the block drain Just retighten it after you drain the block Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now