d-_-b Posted January 2, 2017 Share Posted January 2, 2017 So have just done an engine install into my supra and trying to start the car but she's not wanting to. She cranks over but would not start. (It's not the alarm / immobiliser) On investigation the net result is there doesn't look to be any power getting to the 12v that goes into the fuel pump ecu in the rear quarter. Can anyone help with suggestions as to what to check? Quote Link to comment Share on other sites More sharing options...
ibby Posted January 2, 2017 Share Posted January 2, 2017 Have u checked engine harness body connector to see if that part has power? Quote Link to comment Share on other sites More sharing options...
d-_-b Posted January 2, 2017 Author Share Posted January 2, 2017 Ok after attempt 2 in the deep freeze, got her running! Went along tracing the 12v and rechecked all the connectors and after a bit of pump priming she's fired up & is running. Cheers for the post Ibby, appreciated dude [emoji1360] Quote Link to comment Share on other sites More sharing options...
ibby Posted January 3, 2017 Share Posted January 3, 2017 Fab Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.