d-_-b Posted January 2, 2017 Share Posted January 2, 2017 Hey guys, Question hopefully someone who knows looms & ecus can answer, Cars got a: GE motor Manual gearbox Auto loom with a manual GE ecu My question is will/should this setup of loom & ECU work? If it should, Is there anything else besides the auto park 'fix' (so the car doesn't think it's in park) that needs to be done / required etc..? Thank you for any help... CJ Link to comment Share on other sites More sharing options...
Mike2JZ Posted January 2, 2017 Share Posted January 2, 2017 I've started an Na supra auto using a manual ecu. Manual ecu can't do gearshifts though, otherwise it ran the engine no problem. So if you have a manual trans then it shouldn't be a problem Link to comment Share on other sites More sharing options...
d-_-b Posted January 2, 2017 Author Share Posted January 2, 2017 I've started an Na supra auto using a manual ecu. Manual ecu can't do gearshifts though, otherwise it ran the engine no problem. So if you have a manual trans then it shouldn't be a problem Ah cool, Cheers Mike appreciate the reply! Yea am using a manual transmission so have tidied the old auto connections out the way. Read a bunch of different forums and some people were mentioning ecu repinning etc so thought I would ask on here to find out! Link to comment Share on other sites More sharing options...
safcdixon Posted January 2, 2017 Share Posted January 2, 2017 I reshelled my auto tt into a 6speed shell, the body looms are identical on all supras, dash looms and door looms differ by spec but the body loom is the same Link to comment Share on other sites More sharing options...
d-_-b Posted January 2, 2017 Author Share Posted January 2, 2017 I reshelled my auto tt into a 6speed shell, the body looms are identical on all supras, dash looms and door looms differ by spec but the body loom is the same What about the engine looms, is the only difference between a manual loom and an auto loom the extra section for the auto box connectors? Link to comment Share on other sites More sharing options...
safcdixon Posted January 2, 2017 Share Posted January 2, 2017 Im not certain on that one mate, id expect so, iirc you can run an manual on a auto ecu but not the other way round Link to comment Share on other sites More sharing options...
d-_-b Posted January 2, 2017 Author Share Posted January 2, 2017 Cheers dude, that matches with what I've read across a few forums and different posts Link to comment Share on other sites More sharing options...
Josh42 Posted January 3, 2017 Share Posted January 3, 2017 You'll need to solder 4 wires on the gearbox loom extension. 2 for the inhibitor switch and 2 for your reverse lights IIRC Link to comment Share on other sites More sharing options...
d-_-b Posted January 3, 2017 Author Share Posted January 3, 2017 You'll need to solder 4 wires on the gearbox loom extension. 2 for the inhibitor switch and 2 for your reverse lights IIRC /QUOTE] Legend, cheers Josh [emoji1360] Link to comment Share on other sites More sharing options...
Josh42 Posted January 3, 2017 Share Posted January 3, 2017 b;4191233']Legend' date=' cheers Josh [emoji1360'] From memory (and please verify this by searching for the tech article), I'm sure it was a black wire and a black with red trace wire need to be joined to bypass the inhibitor switch to allow the car to start. I'm sure it's then the yellow wire and white wire from the gearbox reverse sensor need to be joined to the loom wires. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now