monkey3 Posted December 6, 2016 Share Posted December 6, 2016 (edited) Hi, Does anyone know of a reputable place in the south east (not too far from Maidstone would be good) that could help set up my track car? I've recently put new suspension on it so it needs the tracking done but it's pretty low so the normal "hook over the wheels" kit doesn't work. I was also hoping to have it corner weighted as I've been told this would make a lot of difference. Any ideas? Edited December 6, 2016 by monkey3 (see edit history) Quote Link to comment Share on other sites More sharing options...
Mk4Gaz Posted December 6, 2016 Share Posted December 6, 2016 Try elite in Rainham. They're very good Quote Link to comment Share on other sites More sharing options...
Mike2JZ Posted December 6, 2016 Share Posted December 6, 2016 Unless it's a track car then I wouldn't bother with corner weighting. Quote Link to comment Share on other sites More sharing options...
monkey3 Posted December 6, 2016 Author Share Posted December 6, 2016 Unless it's a track car then I wouldn't bother with corner weighting. It's solely a track car, not road legal at all, fully caged, full harness, perspex (not perspex) windows, brake bias valves, etc. - - - Updated - - - Try elite in Rainham. They're very good /QUOTE] I've used them a fair bit in the past but I don't think they do corner weighting though. Quote Link to comment Share on other sites More sharing options...
Frank Bullitt Posted December 6, 2016 Share Posted December 6, 2016 If it's solely a track car why not travel a little further and see Chris Wilson? Quote Link to comment Share on other sites More sharing options...
Mike2JZ Posted December 7, 2016 Share Posted December 7, 2016 It's solely a track car, not road legal at all, fully caged, full harness, perspex (not perspex) windows, brake bias valves, etc. - - - Updated - - - I've used them a fair bit in the past but I don't think they do corner weighting though. Ooo nice ok. In that case then, there is a guy local to kent who was recomended to me for corner weighting/geo setup. Mainly does MX5's but he has/did have a track supra. http://www.kentmx5.co.uk/ Might be worth getting in contact Quote Link to comment Share on other sites More sharing options...
monkey3 Posted December 8, 2016 Author Share Posted December 8, 2016 Ooo nice ok. In that case then, there is a guy local to kent who was recomended to me for corner weighting/geo setup. Mainly does MX5's but he has/did have a track supra. http://www.kentmx5.co.uk/ Might be worth getting in contact Perfect! They're away until tomorrow but I'll try them again then. Looks about right to me. Thanks. - - - Updated - - - If it's solely a track car why not travel a little further and see Chris Wilson? I would but it really is a long way. Quote Link to comment Share on other sites More sharing options...
monkey3 Posted December 28, 2016 Author Share Posted December 28, 2016 Ooo nice ok. In that case then, there is a guy local to kent who was recomended to me for corner weighting/geo setup. Mainly does MX5's but he has/did have a track supra. http://www.kentmx5.co.uk/ Might be worth getting in contact Chris at mx5 was really helpful and the car is now set up. We're yet to test it but we're hopefully going to on the 22nd Jan. Thanks for the suggestion Mike. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.