Widearch body panels -> Removeable Screw rivets

[Mike2JZ]

Hi,

 

Going to be riveting a ridox rear wide arch kit on the supra soon.

 

I'm not a huge fan of standard rivets that need to be drilled out if the arch kit needs to come off.

 

On my veilside wide kit that came from japan, they had these type of rivets that sat in the body panels of the car, but the inner section of the rivet was threaded, so a small screw/bolt was able to hold the wide arch panel on.

 

They were nice as it allowed me to take the skirts and rear bumper off in a few minutes.

 

I want to use similar going forward but can't seem to find what I'm after.

 

Does anyone know where I can find them?

 

Thanks

[zelliott]

http://www.ebay.co.uk/itm/Plastic-Panel-Trim-Screws-Bumper-Clips-Fairing-Screw-Rivets-6mm-m6-Packs-10-100-/170935610114?var=&hash=item27cc8e6b02:m:mcEIh_wvpU8eUfvzsuIZYdQ

 

Just brought some of these to replace the ones I'm missing in the door card

[TheTurtleshead]

Sounds like you're describing riv-nuts

[Mike2JZ]

http://www.ebay.co.uk/itm/Plastic-Panel-Trim-Screws-Bumper-Clips-Fairing-Screw-Rivets-6mm-m6-Packs-10-100-/170935610114?var=&hash=item27cc8e6b02:m:mcEIh_wvpU8eUfvzsuIZYdQ

 

Just brought some of these to replace the ones I'm missing in the door card

 

They need to be metal . need to hold body panels on

 

Sounds like you're describing riv-nuts

 

Yes that looks like the ones. Thanks

 

Edit: Also known as Nutserts as i've just learnt

Edited November 25, 2016 by Mike2JZ (see edit history)

[clay]

Sounds like you're describing riv-nuts

 

As the man said you want riv nuts..