flatstanley Posted November 18, 2016 Share Posted November 18, 2016 Is the rear quarter panel and rocker panel repairable? Also does it look like my rear subframe is bent or damaged? I was driving and my rear tire popped and caused me to swing in to a metal fence. Link to comment Share on other sites More sharing options...
Dnk Posted November 18, 2016 Share Posted November 18, 2016 Anything is repairable and very hard to tell if the subframe is damaged or not without inspecting it, i'd be inclined to to replace the whole corner (all the suspension arms and hub) and then get it on a wheel alignment machine and see where it sits. Link to comment Share on other sites More sharing options...
Al Massey Posted November 18, 2016 Share Posted November 18, 2016 Can't tell with the subframe as you haven't shown any good pictures of it. The subframe mounting points are easy to see though. Two at the front is held by a vertical bolt each side. At the back, it's held be a bracket each side. One but on each hold the subframe to the bracket, and the bracket is held to the chassis via 4 bolts each side. Also the anti roll bar is held on this bracket. If they all look fine I'd be inclined to say the subframe is ok and it was just the wishbones that are bent. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now