Paul Whiffin Posted November 10, 2016 Share Posted November 10, 2016 Well we've just finished off another one of our Supra BMW DCT 7 speed gearbox conversions and the results are pretty amazing. So on Lee Burley's Supra we've done nothing else apart from change the gearbox from the stock autobox to the BMW 7 speed DCT. Stock autobox best I could get was: 0-60 5.60 0-100 9.88 30-50 2.10 50-70 1.56 30-70 3.66 30-100 7.15 With the DCT 7 speed gearbox: 0-60 4.5 (I did 1 run in 4.2 but didn't get a 0-100 reading) 0-100 8.69 30-50 1.43 50-70 1.68 30-70 3.11 30-100 6.34 As you see from the chart its knocked over 1 second off the 0-60 and 0-100, this was with 5 gearchanges on the DCT gearbox versus 3 on the stock autobox included in that time as well, not bad! Video to follow soon.... Link to comment Share on other sites More sharing options...
Wez Posted November 10, 2016 Share Posted November 10, 2016 Very nice Link to comment Share on other sites More sharing options...
Scooter Posted November 10, 2016 Share Posted November 10, 2016 What setup is Lee's car, bpu? Link to comment Share on other sites More sharing options...
Paul Whiffin Posted November 10, 2016 Author Share Posted November 10, 2016 What setup is Lee's car, bpu? About 550bhp approx, see here for details https://www.facebook.com/pg/garagewhif1/photos/?tab=album&album_id=1147023558685215 - - - Updated - - - What setup is Lee's car, bpu? About 550bhp approx, see here for details https://www.facebook.com/pg/garagewhif1/photos/?tab=album&album_id=1147023558685215 Link to comment Share on other sites More sharing options...
Supra2jze Posted November 10, 2016 Share Posted November 10, 2016 Impressive. How much would that cost (Gearbox + Labour) ? Link to comment Share on other sites More sharing options...
Scooter Posted November 10, 2016 Share Posted November 10, 2016 Certainly impressive, re the cost it's going to be mainly one for the guys already with a syvecs ecu as I believe you'll need one to control everything. I'm sure this would be an awesome upgrade to a bpu auto but with box install plus ecu and mapping I'd imagine not so financially attractive! Link to comment Share on other sites More sharing options...
Pete Posted November 11, 2016 Share Posted November 11, 2016 Isn't 0-60 in 5.6 seconds a bit slow? Link to comment Share on other sites More sharing options...
Big Supes Posted November 11, 2016 Share Posted November 11, 2016 Isn't 0-60 in 5.6 seconds a bit slow? You would have thought that was stock 0-60mph. Whatever the case, scrubbing 1 sec off is mighty impressive. Link to comment Share on other sites More sharing options...
TheTurtleshead Posted November 11, 2016 Share Posted November 11, 2016 Isn't 0-60 in 5.6 seconds a bit slow? On a first attempt, on a damp concrete runway, I did 5.2 0-60 with stock TT6 power. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted November 11, 2016 Author Share Posted November 11, 2016 Isn't 0-60 in 5.6 seconds a bit slow? Wheel spin issues with 550bhp and no traction control. Sometimes more power can slow you down. Link to comment Share on other sites More sharing options...
ibby Posted November 12, 2016 Share Posted November 12, 2016 How much does this cost? Link to comment Share on other sites More sharing options...
el_bandido Posted November 18, 2016 Share Posted November 18, 2016 Paul, does the addition of the DCT allow for more sophisticated traction control strategies? Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 18, 2016 Share Posted November 18, 2016 I would imagine mapping for optimal traction control is more complex on a an automatic, as if you reduce engine torque they may want to change up.... Link to comment Share on other sites More sharing options...
gordy.r Posted November 18, 2016 Share Posted November 18, 2016 Paul, doesn't the Syvecs take care of traction issues? This is the conversion I have been interested in the last few months and following very closely. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted November 18, 2016 Author Share Posted November 18, 2016 Paul, doesn't the Syvecs take care of traction issues? This is the conversion I have been interested in the last few months and following very closely. The Syvecs has a very good traction control system built into it yes. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now