pedrosixfour Posted September 6, 2016 Author Share Posted September 6, 2016 As request, pics of some of the Volk wheels I have. I have another complete set of these available in an 8" & 9" stagger. [ATTACH=CONFIG]214466[/ATTACH] [ATTACH=CONFIG]214467[/ATTACH] [ATTACH=CONFIG]214468[/ATTACH] [ATTACH=CONFIG]214469[/ATTACH] [ATTACH=CONFIG]214470[/ATTACH] [ATTACH=CONFIG]214471[/ATTACH] Cost of delivery one full set of 17" rims from Ireland to the UK is £70. The tyres will be removed from all 17" rims prior to shipping, trust me, you don't want them! Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 6, 2016 Author Share Posted September 6, 2016 Gauge set, Boost Controller, Apex'i AFC, CW FCD and 1.1bar Restrictor Ring all sold. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 6, 2016 Author Share Posted September 6, 2016 Front hubs, rear hubs and rear subframe sold. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2016 Author Share Posted September 7, 2016 PS Fluid Cooler and lines sold Link to comment Share on other sites More sharing options...
mihai Posted September 7, 2016 Share Posted September 7, 2016 brake disks are set of 4 ? good for Jspec ? Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2016 Author Share Posted September 7, 2016 brake disks are set of 4 ? good for Jspec ? Set of four, yes mate. Discs suit the four piston front calipers and the two piston rear calipers, commonly referred to as UK spec brakes, but that is a bit of a misnomer. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2016 Author Share Posted September 7, 2016 Pic of the Setrab 23 row oil cooler. Can be supplied with the bracket I made to mount the cooler square onto the direction of airflow passing through the passenger side inlet. This cooler comes with sandwich plate (thermostatically controlled) and braided lines. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2016 Author Share Posted September 7, 2016 I also have the lower sections of both front wheel arch liners, the sections with the louvers, required to protect a cooler like this and the SMIC on the opposite side, they also increase the coolers' efficiency. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2016 Author Share Posted September 7, 2016 Pic of the pipework I came up with to get the NA airbox to work with a turbo'd engine. Works for both 1JZ & 2JZ conversions I would think. Link to comment Share on other sites More sharing options...
kraig Posted September 7, 2016 Share Posted September 7, 2016 Do you steering column shroud? I need upper bit but will take both parts. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2016 Author Share Posted September 7, 2016 Do you steering column shroud? I need upper bit but will take both parts. I have mate. £25 posted? Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2016 Author Share Posted September 7, 2016 As I mentioned in another thread, the various sub-frames and brackets, that tend to perish on UK (driven) Supras, are structurally pristine on my car. These can be separated from the main body using the appropriate tools and methods and made available to buy. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 7, 2016 Author Share Posted September 7, 2016 Rear upper wishbones now sold. Only front upper wishbones remaining from suspension components. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 8, 2016 Author Share Posted September 8, 2016 Happy to report that all items which have been purchased so far have now been either been collected by the courier today or will be collected tomorrow. All buyers have received tracking numbers, and in the case of tomorrow's collections, a corrected tracking number. My advise to you all is this; if you are going to copy & paste a message to a dozen people, changing only a digit or two for each new recipient, be damn sure the rest of the digits are in the correct order. Mother of God. Any parts enquiries I have not completely dealt with so far will need be put on hold until after the weekend I'm afraid. I've a bit of renovating around the house to do, before I find a bag packed for me, on the wrong side of my front door. Keep the enquiries coming though, I'll be back in "breaker" mode come Monday. I will be splitting the engine & gearbox early next week to do a proper presentation of what is included in the R154 conversion kit. I don't actually know if it is necessary for installing an R154 box into an auto chassis, but the gearstick aperture section of the transmission tunnel can be made available, if needed. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 8, 2016 Author Share Posted September 8, 2016 Steering column shroud/cowl sold Link to comment Share on other sites More sharing options...
curious Posted September 8, 2016 Share Posted September 8, 2016 pm sent for parts. Thanks Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 8, 2016 Author Share Posted September 8, 2016 pm sent for parts. Thanks Replied. Link to comment Share on other sites More sharing options...
curious Posted September 9, 2016 Share Posted September 9, 2016 Payment sent. Thanks Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 9, 2016 Author Share Posted September 9, 2016 Payment sent. Thanks PM'd mate Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 12, 2016 Author Share Posted September 12, 2016 Hi, I'm after all of the internal rear tailgate plastic trim Also the drivers side rear strut cover plastic trim? Thanks Carl Hi Carl. The boot lid trim has escaped me. Can't recall ever selling it, it made have been unwittingly discarded during a clear-out of the shed. If I do trip over it down the line you'll hear from me. The only remaining piece of trim I can find from the boot area is the piece with the boot light, if it is of any use to you. Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 13, 2016 Author Share Posted September 13, 2016 Pics from today of the Carbing front strut brace with brake master cylinder stopper. [ATTACH=CONFIG]214661[/ATTACH] [ATTACH=CONFIG]214662[/ATTACH] [ATTACH=CONFIG]214663[/ATTACH] [ATTACH=CONFIG]214664[/ATTACH] [ATTACH=CONFIG]214665[/ATTACH] [ATTACH=CONFIG]214666[/ATTACH] [ATTACH=CONFIG]214667[/ATTACH] [ATTACH=CONFIG]214668[/ATTACH] As I said earlier, this strut brace will fit BOTH the NA and TT (1JZ & 2JZ) engines. Link to comment Share on other sites More sharing options...
CarlM Posted September 13, 2016 Share Posted September 13, 2016 Hi Carl. The boot lid trim has escaped me. Can't recall ever selling it, it made have been unwittingly discarded during a clear-out of the shed. If I do trip over it down the line you'll hear from me. The only remaining piece of trim I can find from the boot area is the piece with the boot light, if it is of any use to you. No problem! Thanks for letting me know [emoji4] Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 15, 2016 Author Share Posted September 15, 2016 Pictures of the Sparco Evo3 seats, sitting on Sabelt side mounts, with Sparco (Sabelt) 3", 4 point, racing harnesses. All in excellent condition, the only marks present are on, what was, the driver's seat and I've shown them as best as I can. [ATTACH=CONFIG]214710[/ATTACH] [ATTACH=CONFIG]214711[/ATTACH] [ATTACH=CONFIG]214712[/ATTACH] [ATTACH=CONFIG]214713[/ATTACH] [ATTACH=CONFIG]214714[/ATTACH] [ATTACH=CONFIG]214715[/ATTACH] [ATTACH=CONFIG]214716[/ATTACH] [ATTACH=CONFIG]214717[/ATTACH] [ATTACH=CONFIG]214718[/ATTACH] [ATTACH=CONFIG]214719[/ATTACH] Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 15, 2016 Author Share Posted September 15, 2016 A few shots of the shoulder areas on both seats, no wear at all. A couple of the harnesses themselves, which will be supplied with the eyebolts I used to fix the lap belts in place. The shoulder straps were looped around the rear cage cross member. And a couple of the seat undersides. [ATTACH=CONFIG]214720[/ATTACH] [ATTACH=CONFIG]214721[/ATTACH] [ATTACH=CONFIG]214722[/ATTACH] [ATTACH=CONFIG]214723[/ATTACH] [ATTACH=CONFIG]214724[/ATTACH] [ATTACH=CONFIG]214725[/ATTACH] [ATTACH=CONFIG]214726[/ATTACH] [ATTACH=CONFIG]214727[/ATTACH] Link to comment Share on other sites More sharing options...
pedrosixfour Posted September 16, 2016 Author Share Posted September 16, 2016 Both seats , harnesses and all fixings now sold. Top instrument cluster/warning light panel also now sold. Link to comment Share on other sites More sharing options...
Recommended Posts