cainhead Posted August 22, 2016 Share Posted August 22, 2016 Hello, Before I take the last resort of sending my AEM back to the USA to be tested. Would anyone be willing to help me out. Basically I need test my AEM V2 on someones car. I need to check that it powers up each time the key is turned to the on position. I can probably do it without even starting the car as I can plug it in to my laptop and check its connecting to the software. Im based in the SW London are but willing to travel if anyone can help. Many beers to anyone that can help. If you cant no worries. Cheers Andrew Quote Link to comment Share on other sites More sharing options...
absz Posted August 22, 2016 Share Posted August 22, 2016 Have you checked to see if pin 1 on ECU is getting a ignition feed will save you swapping ECU also do you have the engine management Light illuminated when ignition is ON as its the same fuse circuit Quote Link to comment Share on other sites More sharing options...
cainhead Posted August 22, 2016 Author Share Posted August 22, 2016 Yeah checked everything, all the pins that are supposed to get power are doing so. I also tested my stock ECU and thats working everytime. Have you checked to see if pin 1 on ECU is getting a ignition feed will save you swapping ECU also do you have the engine management Light illuminated when ignition is ON as its the same fuse circuit Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.