Suspension joints (Boots)

[LOGIE]

Ok terrible title. Im trying to find out if the rubber boots on all the suspension parts with balljoints can be replaced? Ie can just the boot be replaced. (Circled in pic) the knuckle/balljoint itself is fine but all my rubber covers have a slash in them...can these be replaced?

 

 

Edited August 22, 2016 by LOGIE (see edit history)

[Big Mark]

ebay. I changed all mine when I powder coated all my suspension arms

 

Just take the old ones off and measure the diameter of the holes at each end. Then use lock wire around twice to secure the new ones on.

[LOGIE]

Cheers Mark dont suppose youve got a link to the ones you bought?

 

 

[Scooter]

There is/was a Ben, mechanic guy in Surrey........can't for the life of me remember his username (has a silver facelift TT auto) though but I remember he replaced them and I believe had stock/or could get hold of them.

[jim]

There is/was a Ben, mechanic guy in Surrey........can't for the life of me remember his username (has a silver facelift TT auto) though but I remember he replaced them and I believe had stock/or could get hold of them.

 

Benjy possibly?

[Big Mark]

To be honest I brought about 4 different sizes as needed them for all the boots on the car. Hence why I suggest measuring exactly what diameter hole you need at each end and just checking out ebay. I would say that if anything it's better that the larger diameter is a couple of mm too small than too big if you can't get exact as makes lock wiring them easier.

[LOGIE]

Cheers folks.