Big Mark Posted August 18, 2016 Share Posted August 18, 2016 Does anyone know any part numbers (or vehicle info) for DBW pedal and throttle? Apparently there is a DBW Toyoto pedal that bolts directly on with no mods I need a 90mm Throttle body, I know there is a corvette one but not sure which model/year. Is there any others that are also 90mm? Any tips on where to get the connector and wiring from for these? Link to comment Share on other sites More sharing options...
j_jza80 Posted August 18, 2016 Share Posted August 18, 2016 The throttle body is a Corvette LS9 one. Whifbitz sell kits including the pedal you want (I have one in mine), but they won't tell you which car it comes from. The writing will be specific to the pedal, then custom loom to whichever ecu you are using. Link to comment Share on other sites More sharing options...
Big Mark Posted August 18, 2016 Author Share Posted August 18, 2016 I've seen the Whifbitz, kit. It's a lot of money when you can probably pick a pedal and throttle up from ebay for a fraction of that. I'm going for an aftermarket intake so won't need the adaptor as will get manifold modified to fit whatever throttle body I get, or vica versa. Link to comment Share on other sites More sharing options...
johnny g Posted August 18, 2016 Share Posted August 18, 2016 Check the Yaris. I'm sure I've heard that works. I know it does in the MR2, and Toyota notoriously make things similar. Wiring can be sourced from the US. Check my garage for part numbers from my DBW setup. Link to comment Share on other sites More sharing options...
Style Posted August 18, 2016 Share Posted August 18, 2016 http://www.ebay.ie/itm/2001-51REG-FACELIFT-LEXUS-GS300-GS430-ACCELERATOR-GAS-THROTTLE-PEDAL-89281-47010-/401165190543?hash=item5d674f058f:g:pa8AAOSwdzVXoyTQ Look familiar? Link to comment Share on other sites More sharing options...
Big Mark Posted August 18, 2016 Author Share Posted August 18, 2016 : Link to comment Share on other sites More sharing options...
Style Posted August 18, 2016 Share Posted August 18, 2016 That was just with some googling around and based on the comparison between the 2. Hopefully it's the right one! Link to comment Share on other sites More sharing options...
Big Mark Posted August 19, 2016 Author Share Posted August 19, 2016 Pedal sorted. But any recommendations for the actual throttle body? The aftermarket inlet manifold is 90mm. Looking on ebay some of these may be potentials. Anyone got any recommendations? Maserati (only 82mm tho): [/url] Corvette LS9 (not sure on size): link Bentley (no idea on size tho): link BBK: link Corvette LS3 (fugly): link Link to comment Share on other sites More sharing options...
Style Posted August 19, 2016 Share Posted August 19, 2016 Bosch ones are an option too. I think the ones used on Porsche 996 Turbos are along the right lines Link to comment Share on other sites More sharing options...
j_jza80 Posted August 20, 2016 Share Posted August 20, 2016 I suspect the Maserati one (as JamieP is using) is exactly the same as my Porsche 996 turbo one. I don't think they're 90mm. Link to comment Share on other sites More sharing options...
Wez Posted August 20, 2016 Share Posted August 20, 2016 Bosch / Porsche DBW works really well with right setup Link to comment Share on other sites More sharing options...
Big Mark Posted August 20, 2016 Author Share Posted August 20, 2016 The Maserati, Porsche and Bentley are all Bosch. Maserati and Porsche are 82mm, the largest Bosch do. Part number 0 280 750 101 (link) I'm just curious as to what other options are out there but will probably got with the Bosch. Link to comment Share on other sites More sharing options...
j_jza80 Posted August 20, 2016 Share Posted August 20, 2016 If you don't mind a bit of fabrication, what about E46 M3 DBW ITB's? Link to comment Share on other sites More sharing options...
Big Mark Posted August 20, 2016 Author Share Posted August 20, 2016 Errr NO! Adapting the flange on a manifold to fit the bolt pattern of a DBW Throttle body is one thing, but ITB's would be a total pain in the arse I suspect. Link to comment Share on other sites More sharing options...
j_jza80 Posted August 20, 2016 Share Posted August 20, 2016 Yep, but it would make the engine more responsive Link to comment Share on other sites More sharing options...
Paul Whiffin Posted August 20, 2016 Share Posted August 20, 2016 The Maserati, Porsche and Bentley are all Bosch. Maserati and Porsche are 82mm, the largest Bosch do. Part number 0 280 750 101 (link) I'm just curious as to what other options are out there but will probably got with the Bosch. That's 82mm ID though with a 90mm OD, perfect for what you need. You will need to put a lip on the throttle body though as its meant for a NA engine. We've run this throttle body up to 900bhp so far. Link to comment Share on other sites More sharing options...
Big Mark Posted August 20, 2016 Author Share Posted August 20, 2016 Thanks Paul, I'll add it to my shopping list. Not getting the need for a lip tho? Link to comment Share on other sites More sharing options...
berg Posted August 20, 2016 Share Posted August 20, 2016 I imagine the lip will help to stop the hose coming off under boost Link to comment Share on other sites More sharing options...
Big Mark Posted August 21, 2016 Author Share Posted August 21, 2016 True, not a biggie to sort out Berg. Has that inlet manifold arrived yet? It's still not relisted. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted August 21, 2016 Share Posted August 21, 2016 I imagine the lip will help to stop the hose coming off under boost Correct. Link to comment Share on other sites More sharing options...
Big Mark Posted August 25, 2016 Author Share Posted August 25, 2016 (edited) Is the Throttle body off a 2007 997 GT3 the correct part? If I put the reg of this (link) car into Euro car parts I get this (link) and this weekend Eurocarparts have 25% off EVERYTHING. So if it's the correct part it'd be a great price. Edited August 25, 2016 by Big Mark (see edit history) Link to comment Share on other sites More sharing options...
Nodalmighty Posted August 25, 2016 Share Posted August 25, 2016 Speak to Craig at Dyno Torque, he uses various combinations of pedals and DBW's and knows where to get them from. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted August 25, 2016 Share Posted August 25, 2016 Is the Throttle body off a 2007 997 GT3 the correct part? If I put the reg of this (link) car into Euro car parts I get this (link) and this weekend Eurocarparts have 25% off EVERYTHING. So if it's the correct part it'd be a great price. The 82mm ID body is off a Maserati, Bosch part number 0280750101, you can see all of the different types listed here http://www.bosch-motorsport.com/media/catalog_resources/Electronic_Throttle_Body_Datasheet_51_en_10726070795pdf.pdf Look out for them on ebay, they come up quite a lot on there... Link to comment Share on other sites More sharing options...
kabnine Posted July 12, 2019 Share Posted July 12, 2019 Pedal sorted. But any recommendations for the actual throttle body? The aftermarket inlet manifold is 90mm. Looking on ebay some of these may be potentials. Anyone got any recommendations? Maserati (only 82mm tho): [/url] Corvette LS9 (not sure on size): link Bentley (no idea on size tho): link BBK: link Corvette LS3 (fugly): link Hey Mark What pedal did you decide on? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now