Jump to content
The mkiv Supra Owners Club

Blitz Nur Spec-R v HKS Carbon Ti v HKS Racing Ti


charlton

Recommended Posts

I'm stuck on which one to go for, I have the first two but no experience with the last

 

Nur Spec

Pros: Sounds great and looks the best

Con: Sits too low

 

Carbon

Pros: Sits well and looks decent

Con: Maybe too quiet?

 

Racing

- How does it sit compared to the other two?

- How loud is it on a TT compared to the Nur Spec?

- Is a 4" exhaust overkill on a BPU TT? (I won't be going single for some time, manual conversion first!)

Link to comment
Share on other sites

HKS Racing Ti gets my vote.

 

1.Ground clearance is surprisingly good for a 4" exhaust system. Quality and fitment is as you'd expect from HKS...Brilliant!

 

2. Not so how loud it would be on a TT, but it sounds beautiful on a single turbo setup. Really compliments the 2JZ soundtrack, especially on boost :D

 

3. I dont think there's really such thing as overkill with exhaust setups on supras, the quicker you can release the exhaust gases the better so the 4" system would be ideal, although a 3" system would be ok.

Edited by Chris Bailey (see edit history)
Link to comment
Share on other sites

Well I've had the Nur Spec R, Whifbitz 4" TI (Copy of the HKS) and now running the New HKS Hi-Power racing muffler.

 

Out of them all I think the one I've currently got fitted is the best, sounds lovely and got good clearance. It's style is like the Nur spec with the slash cut tip and angle.

 

The 4" TI did sound nice, but was abit much after awhile plus I've never really liked the look of the rear box how it sits. It's not too much for BPU it will run fine with it, it's just not necessary.

 

The only drawback that the new HKS I've got fitted states it's a full stainless system but the midpipe coating has started to come off and slight surface rust is starting to show. Other then that I love it.

Link to comment
Share on other sites

I think the Nur Spec is loud enough so I wouldn't want louder, it's the ground clearance that bothers me, it sits too low. The piping on the Racing Ti looks very similar to the Nur Spec as in its almost a straight pipe from front to back, so it concerns me that it will sit too low and it will scrape over most speed bumps.

 

I also couldn't have the bung in the exhaust to make it quieter, it just doesn't look right!

Link to comment
Share on other sites

The 4" HKS Racing system is louder then the Nur Spec by a large amount. When I changed mine over to the 4" I noticed it straight away on idle, even more so on WOT. The ground clearance was better then the Nur Spec tho.

 

This is the pipe design on the new HKS Hi-power racing muffler I've got fitted and you can see how it's designed for better ground clearance.

 

image

 

image

Edited by Rob W (see edit history)
Link to comment
Share on other sites

  • 4 years later...

thread revival currently comparing the two systems. Rob W I’m not sure if you’re still active on here but I’d like some more info regarding your setup. The HKS taxing design confuses me a tad, how did you get over the 72mm step down that connects to the 2nd cat pipe. My cars BPU’d so has the 3” decat pipe but loads have told me this system is not true 3” at the flange/connector. Can anyone clarify, I’ve been on all the hks websites etc. Currently contemplating the blitz due to the issues above.

Link to comment
Share on other sites

That’s strange Rob, HKS Europe advised if I had a 3” 2nd decat I’d have to chop the step down off as it’s like 2.8” crazy

 

- - - Updated - - -

 

Didn’t fancy the 4” as it’s over kill with me still having 3” decats

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.