Silece2k6 Posted July 4, 2016 Share Posted July 4, 2016 Anyone ever tryed one of this manifold? I know.the spooling should be a little diffrent (bad) against a twinscroll Manifold, but I hate the cheap ebay cracking things. I dont want go 700hp Plus with my Supra, ao do you think a Cast Manifold will support ~600hp? Gesendet von meinem E6653 mit Tapatalk Link to comment Share on other sites More sharing options...
Frank Bullitt Posted July 4, 2016 Share Posted July 4, 2016 Spooling will be better on a cast, but the sound will be different. It looks like a copy of the FSR manifold - http://fsrmotorsports.com/component/virtuemart/?page=shop.product_details&flypage=flypage.tpl&product_id=129&category_id=22&Itemid=87 Link to comment Share on other sites More sharing options...
j_jza80 Posted July 4, 2016 Share Posted July 4, 2016 A short runner cast manifold will kick the crap out of any tubular manifold for spool, even a twinscroll. The downsides are that they're more restrictive, cause higher EGT's, don't sound as nice, and are more difficult to repair if they do crack (in the case of a cast one). Link to comment Share on other sites More sharing options...
pedrosixfour Posted July 4, 2016 Share Posted July 4, 2016 If the 1JZ cylinder head was the same as the 2JZ I'd be on this like white on rice. http://www.mkivsupra.net/vbb/showthread.php?334750-2JZ-GTE-log-manifold Link to comment Share on other sites More sharing options...
Silece2k6 Posted July 4, 2016 Author Share Posted July 4, 2016 Well yes.this should be fit. But its too expensive, you can buy them for around 180bucks from ebay.co.uk Gesendet von meinem E6653 mit Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now