The Raven Posted June 1, 2016 Share Posted June 1, 2016 Anyone able to make some clear plastic covers to fit under my bonnet vents? im just about to go BPU and may need to change my ait filter to after market. Summer isnt so much of an issue but winter will mean loads of water getting in. Its never caused an issue before but i dont want it to start! My experience with cutting this stuff is that it will shatter and crack very easy. Quote Link to comment Share on other sites More sharing options...
CraigMoSupraRSP Posted June 1, 2016 Share Posted June 1, 2016 Standard airbox with uprated panel filter will be your best bet for BPU [emoji106] Quote Link to comment Share on other sites More sharing options...
The Raven Posted June 1, 2016 Author Share Posted June 1, 2016 Im thinking there is a problem running a front mount past it?. I still think i will cover the vents. Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted June 1, 2016 Share Posted June 1, 2016 You can have a stock airbox with FMIC hard pipe kit. Although it will all depend on the quality of the FMIC kit. I had the same setup on my old car. Quote Link to comment Share on other sites More sharing options...
Dnk Posted June 1, 2016 Share Posted June 1, 2016 I made my own kit to work with the stock airbox and FMIC, pre moulded hose bends and some aluminium tube was pretty easy to do Do you need Perspex ? why not aluminium or st/st sheet ? Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted June 1, 2016 Share Posted June 1, 2016 Do you need a front mount? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted June 1, 2016 Share Posted June 1, 2016 Although more expensive Lexan sheet is far easier to cut without cracking or crazing. Quote Link to comment Share on other sites More sharing options...
broomie Posted June 3, 2016 Share Posted June 3, 2016 (edited) PM me exactly what u want Edited June 3, 2016 by broomie (see edit history) Quote Link to comment Share on other sites More sharing options...
Al Massey Posted June 3, 2016 Share Posted June 3, 2016 PM me exactly what u want Wow, I now want things making Quote Link to comment Share on other sites More sharing options...
haz182 Posted June 3, 2016 Share Posted June 3, 2016 Anyone able to make some clear plastic covers to fit under my bonnet vents? im just about to go BPU and may need to change my ait filter to after market. Summer isnt so much of an issue but winter will mean loads of water getting in. Its never caused an issue before but i dont want it to start! My experience with cutting this stuff is that it will shatter and crack very easy. this for a TS bonnet? if so i would be interested in covers too... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.