G9RGE Posted May 17, 2016 Share Posted May 17, 2016 I took the supra to a friends garage yesterday to get the 4 wheel alignment sorted. He has done my other Supras so I have never had any issues with him or his garage. They were unable to adjust the passenger side front and rear camber as the bolt was just spinning and not moving the wishbone. So my questions: Am I right in thinking that the bush is Knackered ( is it worth replacing for polybushes) Do I need new lower arms and if so where is the best place to get them? Thanks Quote Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2016 Share Posted May 17, 2016 I don't see how if the eccentric adjuster rotates it doesn't move the arm, unless the rubber bush in the arm is totally shot Does it have the correct adjusters fitted with eccentric washers on each end ? - - - Updated - - - Can you get a photo of the adjusters ? Quote Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2016 Share Posted May 17, 2016 (edited) You can check the bush fairly easily to see if its shot by using a pry bar, surprised the garage didn't spot that though if it is, same goes for having the correct adjusters fitted Edited May 17, 2016 by Dnk (see edit history) Quote Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2016 Share Posted May 17, 2016 The adjusters should look like this Quote Link to comment Share on other sites More sharing options...
Mike2JZ Posted May 17, 2016 Share Posted May 17, 2016 There should be a camber adjuster on the bolt, as well as another one you slide onto the bolt where the nut will sit. Without both I could see why the bolt might spin Quote Link to comment Share on other sites More sharing options...
G9RGE Posted May 17, 2016 Author Share Posted May 17, 2016 I will have a look myself tommorow night and get some photos Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.