Oil stabaliser

[masterfett]

Anyone use it? Have any opinions?

 

We use Lucas heavy duty stabalizer at work in our kart engines and have often wondered if it's worth using in the supra.

Edited May 16, 2016 by masterfett (see edit history)

[Jellybean]

I used it in the Supra , noticeable increase in Oil pressure but it was a defi guage via a sandwich plate ; also used it in my Sisters mini to reduce oil consumption, design flaw in the R53 engine , Mini actually felt quicker , more torque

 

My friend runs and builds along the lines of Trophy Trucks, land rover engines to LSX engines , he highly recommends it

Edited May 17, 2016 by Jellybean (see edit history)

[bignum]

I`ll have a read up on that.

[masterfett]

I used it in the Supra , noticeable increase in Oil pressure but it was a defi guage via a sandwich plate ; also used it in my Sisters mini to reduce oil consumption, design flaw in the R53 engine , Mini actually felt quicker , more torque

 

My friend runs and builds along the lines of Trophy Trucks, land rover engines to LSX engines , he highly recommends it

 

A friend / (acquaintance of mine) swears by it, he runs it in his drag car ... proper drag car, not a tuned street car. But for me its a bit different sticking it in a kart engine compared to my supra! granted our kart engines are thrashed daily .. but.. never run them without it in .. so no real comparisson to make!

Edited May 17, 2016 by masterfett (see edit history)

[Jellybean]

I did not put in the fully recommended amount , I had 1/2 recopmmemed amopunt with a 5W40 Millers; oil pressure increased by 1 bar roughly

From what I read it will increase the oils viscosity (thickness), good for high mileage engines

 

I was shocked with the instant noticeable power in the mini, must be helping with compression; definitely a good product to get the last out of a tired engine