Jump to content
The mkiv Supra Owners Club

SRD - Single Turbo Precision 6466 Gen2 Upgrade - 750rwhp


Sheefa

Recommended Posts

So, the time has come to depart with the chariot on a temporary basis....!

 

I've got a 3 hour drive from Birmingham to Sussex tomorrow morning to drop the car off to Lee and the SRD team, but boy will it be worth it. Plus the weather is looking lovely (a final few blasts at 560fwhp then :))

 

The following is on the job list:

 

  • Fit new OS Gilken LSD Large Case Diff
  • Fit new ASNU 1100 Injectors
  • Fit new Precision 6466 Gen 2 Turbo
  • SRD Stage 2 269 Cams
  • Fit Twin 485 Walbro Pumps and custom fuel lines
  • HKS LA Twin Clutch
  • Fit new SRD Greddy Style Intake Manifold
  • Fuel Flex Sensor & Ethanol
  • Syvecs Toucan
  • Syvecs Fuel pressure sensor
  • Syvecs Oil Temp sensor
  • A few shiny bits, water pump cover, tensioner arm etc
  • New Rear brakes (discs and pads) and potentially refreshed seals
  • New SRD Bumper Undertray with ducting

Currently still browsing the SRD shop to see if anything else takes my temptation......!

 

Aiming for 750rwhp with ethanol as I have a fully built engine and head but a little restricted by exhaust and twin pump setup.

 

Updates to follow from me or Lee.

 

Roll on the summer!!! :D:D

 

Cheers

Greg

 

PS: must hide all of my excitement when collecting in a few weeks from the Mrs, she thinks it's going in for a routine service :)

Edited by Sheefa (see edit history)
Link to comment
Share on other sites

  • Replies 159
  • Created
  • Last Reply

Top Posters In This Topic

Greg you will probably bump into mine at SRD having it's uprated box fitted and then will be properly mapped and dyno'd

Yours is in the best of hands for your upgrades and you will love the new set up

Link to comment
Share on other sites

So, the time has come to depart with the chariot on a temporary basis....!

 

I've got a 3 hour drive from Birmingham to Sussex tomorrow morning to drop the car off to Lee and the SRD team, but boy will it be worth it. Plus the weather is looking lovely (a final few blasts at 560fwhp then :))

 

The following is on the job list:

 

  • Fit new OS Gilken LSD Large Case Diff
  • Fit new ASNU 1100 Injectors
  • Fit new Precision 6466 Gen 2 Turbo
  • SRD Stage 2 269 Cams
  • Fit Twin 485 Walbro Pumps and custom fuel lines
  • HKS LA Twin Clutch
  • Fuel Flex Sensor & Ethanol
  • Syvecs Toucan
  • Syvecs Fuel pressure sensor
  • Syvecs Oil Temp sensor
  • A few shiny bits, water pump cover, tensioner arm etc
  • New Rear brakes (discs and pads) and potentially refreshed seals
  • New SRD Bumper Undertray with ducting

Currently still browsing the SRD shop to see if anything else takes my temptation......!

 

Aiming for 800rwhp with ethanol as I have a fully built engine and head.

 

Updates to follow from me or Lee.

 

Roll on the summer!!! :D:D

 

Cheers

Greg

 

PS: must hide all of my excitement when collecting in a few weeks from the Mrs, she thinks it's going in for a routine service :)

 

Routine service!! "Nothing big love..... Just a new diff turbo fuel system cams clutch, all very cheap things honey" :thumbs:

Link to comment
Share on other sites

Greg you will probably bump into mine at SRD having it's uprated box fitted and then will be properly mapped and dyno'd

Yours is in the best of hands for your upgrades and you will love the new set up

Yours looked lovely as always John. In the Geo currently!

 

 

Link to comment
Share on other sites

Good luck mate. Push this 6466 :D

I shall my friend.

Looking forward to seeing the results, it's a very nice spec!

Cheers Adam.

woop woop! I like that your hiding it from the misses :p

I wouldn't call it hiding it, just not mentioning it......

Routine service pft.... can you handle 800bhps ???

We'll soon see. I'll probably crap my pants and run 1 bar all the time lol

 

 

Link to comment
Share on other sites

Guest Budz86

You'll love it Greg; that 64 spools like a dream and with the ethanol, the thing will be an animal!

 

Out of interest, what spec is your built block?

 

 

Link to comment
Share on other sites

  • 2 weeks later...
You'll love it Greg; that 64 spools like a dream and with the ethanol, the thing will be an animal!

 

Out of interest, what spec is your built block?

 

/QUOTE]

 

Thanks mate. Engine spec is:

 

HKS (Carrillo) rods

Oversize CP Piston and Ring Set (3.1 litres)

New crank

HKS 256 Inlet cam

HKS 264 outlet cam

Ferrea Ti retainers

Polished Q45 throttle body, manifold and cam covers.

Link to comment
Share on other sites

Thanks mate. Engine spec is:

 

HKS (Carrillo) rods

Oversize CP Piston and Ring Set (3.1 litres)

New crank

HKS 256 Inlet cam

HKS 264 outlet cam

Ferrea Ti retainers

Polished Q45 throttle body, manifold and cam covers.

 

Nice spec Greg - have fun with it! :D

Link to comment
Share on other sites

Nice spec Greg - have fun with it! :D

 

Thanks Glenn, glad to see yours is coming on nicely!

 

When is it due back?

 

No idea mate. I'm easy on time, a few weeks I would imagine. Lee and the team are mega busy :)

 

That certainly looks used :)

 

Used like a dirty.......that it is.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.