Sheefa Posted May 5, 2016 Share Posted May 5, 2016 Hi all Car is going into SRD this Saturday for the full beans. Toucan will be installed too. Sorry guys I know there was a thread about this a month or so back and I have searched but cannot find it. What map settings and calibrations do you all have on your Toucan please and how many can you have ? Mine is the S6 and I also have a CAL switch which I was solely going to use for traction control. Again how might this work and does the TC use slip settings like Racelogic did ? Obviously want a mixture of full boost, anti-lag, anti-theft, valet mode, MOT etc. Thanks Greg 1) Link to comment Share on other sites More sharing options...
johnny g Posted May 5, 2016 Share Posted May 5, 2016 1. 1.4bar, 99 map 2. Wastegate, 99 map 3. 1.2bar, 95 map 4. Wastegate. 95 map 5. Anti-theft (no fuel map at all) 6. Valet mode 3k limit 7. Unused 8. Unused TC was 1. 0% slip 2. 15% slip 3. 25% slip 4. 50% slip 5. Off 6. Unused 7. Unused 8. Unused Link to comment Share on other sites More sharing options...
Mike2JZ Posted May 5, 2016 Share Posted May 5, 2016 1. Full Boost Link to comment Share on other sites More sharing options...
Sheefa Posted May 5, 2016 Author Share Posted May 5, 2016 Haha thanks Mike. Johnny - what do you mean by wastegate please. Forgive my stupidity! Thanks bud. Link to comment Share on other sites More sharing options...
T2 MSW Posted May 5, 2016 Share Posted May 5, 2016 boost level is just on wastegate spring the ECU doesn't interfere with it, so normally about 1.1 bar Link to comment Share on other sites More sharing options...
johnny g Posted May 5, 2016 Share Posted May 5, 2016 Haha thanks Mike. Johnny - what do you mean by wastegate please. Forgive my stupidity! Thanks bud. boost level is just on wastegate spring the ECU doesn't interfere with it, so normally about 1.1 bar That's the one. I think mine was 1.0 bar. It's the minimum boost an engine can run. Link to comment Share on other sites More sharing options...
Sheefa Posted May 5, 2016 Author Share Posted May 5, 2016 Perfect thank you guys. Link to comment Share on other sites More sharing options...
Sheefa Posted May 5, 2016 Author Share Posted May 5, 2016 Here's the thread. Cool. http://www.mkivsupra.net/vbb/showthread.php?327338-Syvecs-Cal-Switches-What-do-you-have&highlight=pops+bangs Link to comment Share on other sites More sharing options...
Sheefa Posted May 5, 2016 Author Share Posted May 5, 2016 (edited) Think I'm going to go with...... 1. Max Boost Anti Lag & Launch Control (circa 800rwhp) 2. Max Boost NO Anti-lag/Launch Control 3. 1.4 bar Antilag & Launch Control (circa 600rwhp) 4. 1.2bar Pops & Bangs (circa 500rwhp) 5. Wastegate Pressure (1 bar) 6. Valet Mode - 3k rev limit 7. MOT/Motorway- No Boost, Lean fuelling 8. Anti-Theft (No Fuel) All traction control settings will be done on CAL switch. Edited May 5, 2016 by Sheefa (see edit history) Link to comment Share on other sites More sharing options...
Hemanhead Posted May 5, 2016 Share Posted May 5, 2016 1 : Low boost 2 : Medium boost 3 : High boost 4 : High boost and launch control 5 : Pops and bangs 6 : Lean cruise 7 : ------------- 8 : Valet Traction cal switch : OFF, it's always off. Link to comment Share on other sites More sharing options...
Krister Posted May 5, 2016 Share Posted May 5, 2016 Why wouldnt you run the lean cruise setup on all the maps? On my AEM V2 where there is no switchable maps, and that's how I've tuned it, ~16AFR on cruise all the time. Link to comment Share on other sites More sharing options...
Luxluc Posted May 5, 2016 Share Posted May 5, 2016 1 : 1.2 bar 2 : 1.7 bar 3 : 2.1 bar 4 : pops and bangs 5 : launch control 6 : MOT Link to comment Share on other sites More sharing options...
Luxluc Posted May 5, 2016 Share Posted May 5, 2016 Why wouldnt you run the lean cruise setup on all the maps? On my AEM V2 where there is no switchable maps, and that's how I've tuned it, ~16AFR on cruise all the time. That's how Ryan set my calibration too .... cruise mode independant of what calibration I'm on. Link to comment Share on other sites More sharing options...
Why T Posted May 6, 2016 Share Posted May 6, 2016 This is interesting as I am getting everything on mine too. Nice to know Fortune03 Aerotop manual single. 'Speed doesn't kill' Link to comment Share on other sites More sharing options...
Hemanhead Posted May 6, 2016 Share Posted May 6, 2016 Why wouldnt you run the lean cruise setup on all the maps? On my AEM V2 where there is no switchable maps, and that's how I've tuned it, ~16AFR on cruise all the time. I didn't map nor set up the calibration Krister, Ryan did. Thats simply what i see on the Toucan, maybe it is like yours. Link to comment Share on other sites More sharing options...
Sheefa Posted May 7, 2016 Author Share Posted May 7, 2016 Thanks all. Going for 4 proper boost settings, a pops and bangs, cruise, MOT and valet. Link to comment Share on other sites More sharing options...
JamieP Posted May 12, 2016 Share Posted May 12, 2016 Why wouldnt you run the lean cruise setup on all the maps? On my AEM V2 where there is no switchable maps, and that's how I've tuned it, ~16AFR on cruise all the time. Throttle response will be bad if you run that lean on cruise all the time. Better to have a lean cruise map if you have the option. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now