T2 MSW Posted May 10, 2016 Author Share Posted May 10, 2016 So now I have engine being delivered tomorrow and I have just sourced the upper and lower sumps I've just ordered some of the other parts I need to build the engine back up. Full engine gasket set new OEM oil pump new OEM water pump Will be thinking about the billet tensioner and why head studs to get. was going to go ARP as the titan ones seem expensive but then just seen the ARP ones only go to 75 ft/lbs ?? Will update thread with pictures as I start the strip down and build back up again. Link to comment Share on other sites More sharing options...
Wez Posted May 10, 2016 Share Posted May 10, 2016 Another nice project Link to comment Share on other sites More sharing options...
T2 MSW Posted May 11, 2016 Author Share Posted May 11, 2016 Another nice project Cheers Wez Link to comment Share on other sites More sharing options...
grahamc Posted May 11, 2016 Share Posted May 11, 2016 I like that hoist thing, rather cool........ just need it to be automated now Link to comment Share on other sites More sharing options...
T2 MSW Posted May 11, 2016 Author Share Posted May 11, 2016 I like that hoist thing, rather cool........ just need it to be automated now Working on that as its far too slow by hand Link to comment Share on other sites More sharing options...
T2 MSW Posted May 11, 2016 Author Share Posted May 11, 2016 Today the new engine arrived. Got dropped in the garage and left as the girlfriend wanted to take one of her horses out cross-country and she can't go on her own so I got dragged along. Got back from XC at about 9 so i was straight in the garage to label up all the wiring loom ready for when I modify it later on. Also managed to strip down most of the turbo side as got a bit carried away and was having fun, lack of light stopped play. Don't know why people don't replace things when they are needed though, spot the issue in the picture below. Brittle as and all falling apart round the edges. Link to comment Share on other sites More sharing options...
T2 MSW Posted May 13, 2016 Author Share Posted May 13, 2016 Turbo side and intake side are now stripped down Link to comment Share on other sites More sharing options...
T2 MSW Posted May 23, 2016 Author Share Posted May 23, 2016 Little more progress tonight. Got all the tools I needed to undo the VVTI cam and a pulley puller. Now got all the front end off and ready to pull the head and send it off to be refreshed next. One thing I noticed is the VVTI timing star seems to be different in that its not two piece, it all appears to be one and therefore does not need welding - can anyone confirm they are indeed different? Link to comment Share on other sites More sharing options...
Frank Bullitt Posted May 23, 2016 Share Posted May 23, 2016 Yep, the VVTi is indeed a one piece item Link to comment Share on other sites More sharing options...
T2 MSW Posted May 23, 2016 Author Share Posted May 23, 2016 Quality thats saves me couple hundred quid Link to comment Share on other sites More sharing options...
Frank Bullitt Posted May 23, 2016 Share Posted May 23, 2016 Might be worth while spending the money saved from not needing to weld it and buying a new timing star. Some of the teeth in the second picture look a little worn on the edges. Link to comment Share on other sites More sharing options...
T2 MSW Posted May 23, 2016 Author Share Posted May 23, 2016 its just the photo mate, actual teeth are perfect. can see they are all complete in pic 1. Link to comment Share on other sites More sharing options...
Frank Bullitt Posted May 23, 2016 Share Posted May 23, 2016 I did wonder that after posting, ignore me Link to comment Share on other sites More sharing options...
T2 MSW Posted June 13, 2016 Author Share Posted June 13, 2016 The engine is now fully stripped. I delivered the head to be refreshed last week and I've been to pick it up today. Head stripped, cleaned, all valve guides replaced, new valve stem seals, valves seated, skimmed and all wrapped ready to go back on. Cam covers -12an bungs welded on and all cleaned up - £480. Considering the work and it was more than I had done last time i don't think thats too bad. Couple of weeks ill start to clean all the bottom end up and start on the re-assembly Link to comment Share on other sites More sharing options...
ripped_fear Posted June 13, 2016 Share Posted June 13, 2016 Where you getting the head done mate? Link to comment Share on other sites More sharing options...
T2 MSW Posted June 13, 2016 Author Share Posted June 13, 2016 Ric Wood motorsport in Stockport. Awesome service and quite reasonable price wise Link to comment Share on other sites More sharing options...
ripped_fear Posted June 13, 2016 Share Posted June 13, 2016 Ric Wood motorsport in Stockport. Awesome service and quite reasonable price wise Cheers, somthing for my winter plans so good to know of a few places if i cant get into SRD. Link to comment Share on other sites More sharing options...
tooley Posted June 14, 2016 Share Posted June 14, 2016 shame it wont be ready for the bmw show at santa pod this weekend ill bet it will cause quite a stir when its done Link to comment Share on other sites More sharing options...
T2 MSW Posted June 14, 2016 Author Share Posted June 14, 2016 Ohhh it will be months before this is ready, its taken nearly 2 just togged the engine striped and off to be rebuilt. Quite enjoying driving it too Link to comment Share on other sites More sharing options...
tooley Posted June 15, 2016 Share Posted June 15, 2016 get yourself onto http://bmwbox.uk/forum/index.php?sid=7e5a64f70aa984660c3304ba44c18d62 will be good to watch the progress thread for all the boys on there Link to comment Share on other sites More sharing options...
JamieP Posted August 11, 2016 Share Posted August 11, 2016 Are you still building this Mike? Link to comment Share on other sites More sharing options...
T2 MSW Posted August 15, 2016 Author Share Posted August 15, 2016 Are you still building this Mike? Yeah think so. not really progressed any with engine yet as been too busy out enjoying using the Supra. That will prob come to an end Sept so ill crack on then. Link to comment Share on other sites More sharing options...
JamieP Posted August 15, 2016 Share Posted August 15, 2016 Nice one, look forward to updates mate. Link to comment Share on other sites More sharing options...
bignum Posted August 15, 2016 Share Posted August 15, 2016 Yeah think so. not really progressed any with engine yet as been too busy out enjoying using the Supra. That will prob come to an end Sept so ill crack on then. Silverstone in november again bud. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now