generalunrest Posted April 30, 2016 Share Posted April 30, 2016 Hi all, I am currently running a uk TT with 1.1 bar boost, all the work done by whiffbitz around 5 years ago, I now want to take it a little further but my budget does not run to a syvecs with 1.5 bar boost so, after talking with Paul Whiffin I have decided to go with the greddy profec, new intercooler and go up to 1.2 bar boost, my question is, will I feel a big difference in performance? thanks in advance to anyone who has gone this route.. Link to comment Share on other sites More sharing options...
np89 Posted April 30, 2016 Share Posted April 30, 2016 You can wind a uk spec out to 1.4 bar no problem on standard turbos. Dont need a syvecs for that. Just dial up your FCD and it will be fine. Ran 1.4bar on a UK spec for 5 years with absolutely no issues and no management Link to comment Share on other sites More sharing options...
np89 Posted April 30, 2016 Share Posted April 30, 2016 And why do you need a new boost controller? The boost on a UK spec wont climb on its own like on a j spec, you shud already have a boost controller if you are running 1.1bar. If you say using a restrictor ring you have been had... Link to comment Share on other sites More sharing options...
ianhid Posted April 30, 2016 Share Posted April 30, 2016 It does sort of depend on the controller that's currently fitted, most will be fine for 1.2bar, although yours might have some other issue hence the replacement suggestion. That or it's up-sell that you don't strictly speaking need, tough to tell without all the relevant facts. If you're still on the stock intercooler a new one is almost certainly a great idea, I know mine is a bit crusty at this point, can't wait for the replacement unit to arrive. This might aslo be worth a quick read: http://www.mkivsupra.net/vbb/showthread.php?247195-Recommend-me-a-boost-controller Link to comment Share on other sites More sharing options...
88LE Posted April 30, 2016 Share Posted April 30, 2016 So is 1.4 bar on a UK spec really safe? My car is going in for BPU next week. Was going to set it at 1.2 bar. You can wind a uk spec out to 1.4 bar no problem on standard turbos. Dont need a syvecs for that. Just dial up your FCD and it will be fine. Ran 1.4bar on a UK spec for 5 years with absolutely no issues and no management /QUOTE] Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 30, 2016 Share Posted April 30, 2016 Try it with a simple bleed valve, if you like you can spend big money on a boost controller. The gains will be minimal though, going from bleed valve to boost controller. If you do the turbos in it will be VERY expensive to fit new ones. Link to comment Share on other sites More sharing options...
imi Posted April 30, 2016 Share Posted April 30, 2016 Hi all, I am currently running a uk TT with 1.1 bar boost, all the work done by whiffbitz around 5 years ago, I now want to take it a little further but my budget does not run to a syvecs with 1.5 bar boost so, after talking with Paul Whiffin I have decided to go with the greddy profec, new intercooler and go up to 1.2 bar boost, my question is, will I feel a big difference in performance? thanks in advance to anyone who has gone this route.. 1.1 -1.2 with all that expenditure = hardly worth it for 15-20ish bhp gain. 1.1 > 1.4 will be noticeable. Link to comment Share on other sites More sharing options...
generalunrest Posted May 1, 2016 Author Share Posted May 1, 2016 i currently have no boost controller just a manual valve .. so do you think that i should just dial up the boost on the valve? Link to comment Share on other sites More sharing options...
mellonman Posted May 1, 2016 Share Posted May 1, 2016 i currently have no boost controller just a manual valve .. so do you think that i should just dial up the boost on the valve? Erm why not you have already to the point you have Link to comment Share on other sites More sharing options...
Chris Wilson Posted May 1, 2016 Share Posted May 1, 2016 Yes, turn it anticlockwise half a turn at a time, and watch that boost gauge like a hawk if it has an FCD fitted. If the boost won't go high enough it may need a restrictor pill in the pressure line to the front turbo. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now