Sheefa Posted April 12, 2016 Share Posted April 12, 2016 Hi These will both be removed in May when I upgrade to SRD Stage 2 cams. As far as I know they've been running perfectly on my car making 560fwhp in an engine built for over 850. The fully built engine has completed no more than 8k miles. Many people have run this spec on their BPU and Single Supras in the past and currently, (Geo, Nic, Jellybean to name a few). These will certainly help with low end power and on stock cams you normally see a drop off in the power curve before the rev limit, but these HKS cams help the car pull to the redline and the mid range pull is also noticeably better. Nic made an extra 30hp with the HKS cams fitted alongside bigger injectors and EMU on his Jspec Turbos. Looking for £300 collected from SRD. Let me know if genuinely interested, I'll accept a £50 holding deposit until May. I may split but ideally wish to sell as a package. I'll ensure Lee checks over them in full before confirming final sale. Thanks Greg Link to comment Share on other sites More sharing options...
Al Massey Posted April 12, 2016 Share Posted April 12, 2016 I could be very tempted at that price Link to comment Share on other sites More sharing options...
Sheefa Posted April 12, 2016 Author Share Posted April 12, 2016 Yep, all genuine and Suprastore sell them for $570 each before the shipping charges so I feel a fair price. Link to comment Share on other sites More sharing options...
TheTurtleshead Posted April 12, 2016 Share Posted April 12, 2016 I run this exact setup, it gives you a great mid-range and makes the torque kick quite brutal. My car made 708hp - 640ft/lbs on a Journal 6266 with V-Power. Surprised you're changing them Greg, all I'd do is buy a 264 intake cam if you want more at the top end. You must be going for a 6466 and 8-900hp+ On the new setup? Recent Dyno plot for anyone considering! The plateau is clutch slip, or it would probably have made a tad more. http://www.mkivsupra.net/vbb/showthread.php?319934-James-s-6266-CEA-SRD-Turbo-Kit-Dyno Link to comment Share on other sites More sharing options...
Mugello Posted April 12, 2016 Share Posted April 12, 2016 If you split, I will take the 264 exhaust cam Link to comment Share on other sites More sharing options...
Dim Sum Posted April 12, 2016 Share Posted April 12, 2016 Greg i've sent a pm Link to comment Share on other sites More sharing options...
Sheefa Posted April 12, 2016 Author Share Posted April 12, 2016 Thanks gents and James mate. I'm going big power hence the change. Yeah the cams are great and excellent power range, just need to go bigger. I'm in Cape Verde at moment so limited access but back tomorrow evening so will respond to all PMs here tomorrow. Ideally I control it for obvious reasons. Thanks Greg Link to comment Share on other sites More sharing options...
RobUK Posted April 12, 2016 Share Posted April 12, 2016 If they haven't sold already I'm interested Link to comment Share on other sites More sharing options...
Dim Sum Posted April 13, 2016 Share Posted April 13, 2016 Greg your inbox is full. The pm ive sent is i buy them Pm how you want to be paid. Link to comment Share on other sites More sharing options...
Sheefa Posted April 13, 2016 Author Share Posted April 13, 2016 All Dim Sum was first with the PM so sold subject to payment. PM to follow. Thanks Greg Link to comment Share on other sites More sharing options...
Recommended Posts