Chris Wilson Posted April 11, 2016 Share Posted April 11, 2016 A gearbox is a torque multiplication device, and so of course is the back axle. A gearbox is traditionally and correctly rated by its torque handling capability in a 1 to 1 gear ratio, at its input shaft over a given RPM range. They have been rather devious and quoted it "at the rear wheels" where the axle ratio has multiplied engine flywheel / gearbox input shaft torque by the diff ratio in a direct gear. Quote Link to comment Share on other sites More sharing options...
Luxluc Posted April 11, 2016 Share Posted April 11, 2016 Until the parts supply dries up, which appears to be happening now Then there is only one solution : keep the car stock Quote Link to comment Share on other sites More sharing options...
Sheefa Posted April 11, 2016 Share Posted April 11, 2016 The big power Supras some of us are running make life hard for the V160 / V161. But that's life : nobody said it would be easy. If things break, you can always fix it. True but also how often will you be running your car at max boost all the time. I know I'll be most likely running mine at 600-650fwhp the majority of time and only increasing to max boost/power when I really need to. A healthy balance is surely a good thing for the box. Quote Link to comment Share on other sites More sharing options...
Luxluc Posted April 11, 2016 Share Posted April 11, 2016 True but also how often will you be running your car at max boost all the time. I'm running on high boost setting all the time. Why go for a certain power goal and driving with 75% of it only ? Quote Link to comment Share on other sites More sharing options...
Sheefa Posted April 11, 2016 Share Posted April 11, 2016 I'm running on high boost setting all the time. Why go for a certain power goal and driving with 75% of it only ? That's because you are mental - I'm not The whole point of my power goal mate is to have a range of power I can deploy at any time via the Toucan when needed. If a Porsche Carrera comes along I'll deploy the 600rwhp. If it's a Lambo then I'll up it..... I personally don't see the need to drive it at full boost all the time, but then our UK roads are very different to yours too my friend Quote Link to comment Share on other sites More sharing options...
Luxluc Posted April 11, 2016 Share Posted April 11, 2016 That's because you are mental - I'm not The whole point of my power goal mate is to have a range of power I can deploy at any time via the Toucan when needed. If a Porsche Carrera comes along I'll deploy the 600rwhp. If it's a Lambo then I'll up it..... I personally don't see the need to drive it at full boost all the time, but then our UK roads are very different to yours too my friend Haha. Nice comment mate ... I like your approach. Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted April 11, 2016 Share Posted April 11, 2016 Then there is only one solution : keep the car stock You realise you're on a Supra forum, don't you? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 11, 2016 Share Posted April 11, 2016 (edited) There's also the issue of 4th and 5th gears being substantially overdriven. The seller makes this comment: "This transmission's gearing is much different than the factory V160, therefore the rear gearing will be too high (3.13). You will need a 4.00 or taller gear to make this match the V160 gearing" Err, where do I get a 4.00 to 1 or 4.11 to 1 or whatever CWP for the Supra case please mister??? He also means (I hope), shorter, not taller gear.... Edited April 11, 2016 by Chris Wilson (see edit history) Quote Link to comment Share on other sites More sharing options...
Nodalmighty Posted April 11, 2016 Share Posted April 11, 2016 Isn't the N/A Manual and auto 4.083:1 ? R154 1- 3.251 2- 1.955 3- 1.310 4- 1.000 5- 0.753 Diff 3.73 W58 1- 3.285 2- 1.894 3- 1.275 4- 1.000 5- 0.783 Diff 4.083 V160 1- 3.827 2- 2.360 3- 1.685 4- 1.312 5- 1.000 6- 0.793 Diff 3.266 (TT) 3.769 (NA) V161 1- 3.724 2- 2.246 3- 1.541 4- 1.205 5- 1.000 6- 0.818 Diff 3.266 (TT) 3.769 (NA) Auto 1- 2.804 2- 1.531 3- 1:1 4- 0.705 Diff 3.769 (TT) 4.083 (NA) Auto TT Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 11, 2016 Share Posted April 11, 2016 That's the small CWP unit though, isn't it? Not sure I'd want to spend £7K or whatever on this conversion and be stuck with the small CWP with its lesser torque handling. Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted April 11, 2016 Share Posted April 11, 2016 Done a comparison on the calculator, first is stock UK spec 6 speed gearing, second is a Magnum with an auto diff ratio Quote Link to comment Share on other sites More sharing options...
Nodalmighty Posted April 11, 2016 Share Posted April 11, 2016 (edited) There may be no choice unless £££ are prepared to be spent on diffs as well. Giken do a unit for the small case do they not? Edited April 11, 2016 by Nodalmighty (see edit history) Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted April 11, 2016 Share Posted April 11, 2016 The small case diff isn't weak, it just isn't as tough as the big case. Loads of people run the small case diffs for drifting etc and have no issues. For normal Road use I'd consider a small case fine for anything upto big single turbo power / torque. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 11, 2016 Share Posted April 11, 2016 The Giken LSD is of course just the LSD bit, and can be ordered to fit to the smaller CWP. At over £7K I would want things spot on, not limited to a small CWP diff in order to get a half sensible set of ratios. Quote Link to comment Share on other sites More sharing options...
imi Posted April 11, 2016 Share Posted April 11, 2016 A gearbox is a torque multiplication device, and so of course is the back axle. A gearbox is traditionally and correctly rated by its torque handling capability in a 1 to 1 gear ratio, at its input shaft over a given RPM range. They have been rather devious and quoted it "at the rear wheels" where the axle ratio has multiplied engine flywheel / gearbox input shaft torque by the diff ratio in a direct gear. thanks for the explanation - just to see if I understand this right - in reality the number would be much less than the quoted torque @ the wheels? - - - Updated - - - That's because you are mental - I'm not The whole point of my power goal mate is to have a range of power I can deploy at any time via the Toucan when needed. If a Porsche Carrera comes along I'll deploy the 600rwhp. If it's a Lambo then I'll up it..... I personally don't see the need to drive it at full boost all the time, but then our UK roads are very different to yours too my friend The gas pedal is a good modulator Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 11, 2016 Share Posted April 11, 2016 thanks for the explanation - just to see if I understand this right - in reality the number would be much less than the quoted torque @ the wheels? Seems a bizarre thing to have put in the ad, plus his mixing up of shorter and taller ratios I have to wonder just what it all means. I have never seen anyone try and cite a gearbox torque figure "at the rear wheels". The figure would vary with what diff ratio the vehicle had, for a start. Very odd. And yes the torque at the rear wheels would have to be divided by the diff ratio to get the torque at the gearbox in 4th gear ( 1 : 1 ratio). Quote Link to comment Share on other sites More sharing options...
Nodalmighty Posted April 11, 2016 Share Posted April 11, 2016 I map my own turbo cars so that min and max boost are interplicants of the throttle angle anyway. I have a hyperspace button somewhere handy just in case (the auto has a mega kick down button under the throttle for this application). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.