Jellybean Posted April 2, 2016 Share Posted April 2, 2016 The trac setup in the intake , anything you can do to remove the butterfly valve , blank off to allow her more efficient flow? Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 2, 2016 Share Posted April 2, 2016 Just remove butterfly, saw off the stubs, and get the resulting holes welded up. Link to comment Share on other sites More sharing options...
Jellybean Posted April 2, 2016 Author Share Posted April 2, 2016 Thanks, can you do in Situ or throttle need to be removed? Link to comment Share on other sites More sharing options...
Kev.O Posted April 2, 2016 Share Posted April 2, 2016 The throttle needs to be removed, which shouldn't take more than 10 minutes if you haven't done it before. Link to comment Share on other sites More sharing options...
Jellybean Posted April 2, 2016 Author Share Posted April 2, 2016 Thanks Guys ! I a sure there is a guide on here somewhere Link to comment Share on other sites More sharing options...
Samurai 20V Posted April 2, 2016 Share Posted April 2, 2016 http://www.mkivsupra.net/vbb/showthread.php?331307-TRAC-ETCS-Butterfly-Valve-Delete-Kit Link to comment Share on other sites More sharing options...
Jellybean Posted April 2, 2016 Author Share Posted April 2, 2016 Thanks just talking to Aristo now just realised the Manifold has a OEM temp sensor , would It be worth getting a threaded port in the Blank off plate? Link to comment Share on other sites More sharing options...
Kev.O Posted April 2, 2016 Share Posted April 2, 2016 Thanks just talking to Aristo now just realised the Manifold has a OEM temp sensor , would It be worth getting a threaded port in the Blank off plate? Yours has a temp sensor fitted? I was under the impression the temp sensor would be used for aftermarket ECU's. I know I had to get a sensor welded and drilled into the manifold when I went down the AEM route. Link to comment Share on other sites More sharing options...
Jellybean Posted April 2, 2016 Author Share Posted April 2, 2016 Link said ECU can use the OEM temp sensor , sorry maybe its on the UK or USDM models I am not aware of one on the JDM Cars Link to comment Share on other sites More sharing options...
Littler Posted April 2, 2016 Share Posted April 2, 2016 I quite liked what Jay did with his TC removal, very clean and added additional clamping for the pipework: Link to comment Share on other sites More sharing options...
RobUK Posted April 3, 2016 Share Posted April 3, 2016 I quite liked what Jay did with his TC removal, very clean and added additional clamping for the pipework: http://www.mkivsupra.net/vbb/attachment.php?attachmentid=210555&stc=1&d=1459635310 The amount of work that went into that was unreal.... He's a perfectionist.... Link to comment Share on other sites More sharing options...
jay200bhp Posted May 12, 2016 Share Posted May 12, 2016 Thanks gents.... pssst I'm back by the way... honda is gone toyota on the boat this month from Japan. .. erm it's 2 jz but it's an aristo... something different. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now