Silece2k6 Posted March 24, 2016 Share Posted March 24, 2016 We have a Problem with the injector. They are leaking at the top hole on the picture. (picture Shows not the Sards) Quote Link to comment Share on other sites More sharing options...
and1c Posted March 24, 2016 Share Posted March 24, 2016 New injector time ? I have heard of quite a few people having issues with the Sards. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 24, 2016 Share Posted March 24, 2016 They sound like they are knackered. I only buy Bosch, Siemens or main brand injectors, to avoid this sort of thing. Many are drilled out smaller ones that give poor patterns or have widely divergent flows at a given pressure. I see quite a few used injectors that have sat unused for ages never recover and have odd patterns and wildly different flow rates, these can det an engine and personally I would only consider new ones, or if you have found used they MUST be flow and pattern tested to be sure they are up to snuff. Quote Link to comment Share on other sites More sharing options...
Silece2k6 Posted March 24, 2016 Author Share Posted March 24, 2016 Mine are new ones with 12monate warranty Quote Link to comment Share on other sites More sharing options...
Tsia Posted March 24, 2016 Share Posted March 24, 2016 I have Sards on my current build and there was trouble getting them to flow properly initially and IIRC problems getting them to idle nicely as well. Wouldn't use them again after hearing about the troubles that they had. Quote Link to comment Share on other sites More sharing options...
Silece2k6 Posted March 24, 2016 Author Share Posted March 24, 2016 Are there any other injector that fits the Stock Fuelrail? Or can I Run topfeed injectors with the Stock Intake manifold? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 24, 2016 Share Posted March 24, 2016 Whifbitz and others do a top feed rail that fits the stock manifold. I think fiveo motorsport (where I tend to buy all my injectors) may do big side feed ones. Reputable and reliable company, recommended. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.