jackso11 Posted March 8, 2016 Share Posted March 8, 2016 I have a crack in my sump (upper section) so looking for one. Anyone got one spare? Link to comment Share on other sites More sharing options...
robby a Posted March 9, 2016 Share Posted March 9, 2016 Pm ,d Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 9, 2016 Share Posted March 9, 2016 Too much silicone around the oil feed O ring? Wrong O ring? Link to comment Share on other sites More sharing options...
jackso11 Posted March 9, 2016 Author Share Posted March 9, 2016 Bit worse than that Chris....bust conrod in cyl 1....bang bang bang bang! cracked sump. I am going to let an engineer mate of mine weld it and see what it looks like if I can't find a sump at a good price. Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 9, 2016 Share Posted March 9, 2016 I have one with a tiny crack by the oil feed hole. It could probably be used as is, or a good TIG welder could easily fix it without causing distortion £35 plus postage and VAT Link to comment Share on other sites More sharing options...
jackso11 Posted March 9, 2016 Author Share Posted March 9, 2016 Had a good look at mine and it can't be welded, what looks like a 2 inch fine crack had hair lines coming off it in multiple directions. I have got one now thanks Chris but I am still looking for another to use on this other block (rebuilding one to go back in my car and then will tackle the damaged one to eventually be swapped back in to keep the original engine in the car), if another one doesn't turn up I will come back to you for that one and weld it up. If you get another in the mean time please let me know. Link to comment Share on other sites More sharing options...
JoseSupra Posted March 9, 2016 Share Posted March 9, 2016 i have one buddy pm supraleeturbo and he can sort you out mate Link to comment Share on other sites More sharing options...
Recommended Posts