mwilkinson Posted February 29, 2016 Share Posted February 29, 2016 I've just purchased a CW SMIC, so will be ditching the FMIC and need to revert the front of the car back to stock. Looking for the following parts: SMIC brackets. All front end ducting. - curved plastic part under the bonnet catch area. - left side plastic ducting sheet. Attaches to chassis rail and seals lower mouth of bumper. - As above but right side. Both towing hooks with bolts. Let me know if you have anything. Natural must be in good condition. Thanks. Matt Link to comment Share on other sites More sharing options...
X13mgr Posted February 29, 2016 Share Posted February 29, 2016 Ive got a full piping kit top hoses are black whifbitz ones. Not sure if I got all the jubilee clips though. But I'd buy new anyway. Link to comment Share on other sites More sharing options...
mwilkinson Posted February 29, 2016 Author Share Posted February 29, 2016 Hi mate. Won't need the SMIC piping. Just the bits as requested above. I'll need some bespoke pipework as I will still be running a single turbo. Link to comment Share on other sites More sharing options...
X13mgr Posted February 29, 2016 Share Posted February 29, 2016 Sorry mate. When u said ducting. Thought u ment that. Didn't read it properly Link to comment Share on other sites More sharing options...
bignum Posted February 29, 2016 Share Posted February 29, 2016 I have the plastic panel between rad and bumper. Link to comment Share on other sites More sharing options...
mwilkinson Posted February 29, 2016 Author Share Posted February 29, 2016 I have the plastic panel between rad and bumper. Can you grab me a picture? Link to comment Share on other sites More sharing options...
mwilkinson Posted March 2, 2016 Author Share Posted March 2, 2016 Bump. Link to comment Share on other sites More sharing options...
mwilkinson Posted March 4, 2016 Author Share Posted March 4, 2016 Bump. Anyone have any of the above? Link to comment Share on other sites More sharing options...
mwilkinson Posted March 11, 2016 Author Share Posted March 11, 2016 Final bump. Link to comment Share on other sites More sharing options...
mwilkinson Posted March 30, 2016 Author Share Posted March 30, 2016 Worth a shot. Bump. No one got parts left over from an FMIC install? Link to comment Share on other sites More sharing options...
Shane Posted March 30, 2016 Share Posted March 30, 2016 Worth a shot. Bump. No one got parts left over from an FMIC install? If you can wait a bit longer (the weekend), I may have one or two parts. Feel sure I have recently tripped over a tow eye. Link to comment Share on other sites More sharing options...
simon197911 Posted March 30, 2016 Share Posted March 30, 2016 I've got the curved plastic panel if you still need one. Link to comment Share on other sites More sharing options...
bignum Posted March 30, 2016 Share Posted March 30, 2016 Sorry missed your reply, i have the curved plastic part and ic brackets and bolts, i`ll pm you now. Link to comment Share on other sites More sharing options...
JayJay1374 Posted March 30, 2016 Share Posted March 30, 2016 Sure I have a tow eye. Can check tonight. Link to comment Share on other sites More sharing options...
mwilkinson Posted March 30, 2016 Author Share Posted March 30, 2016 Hi all. Hopefully Simon (bignum) will have sorted me for the curved plastic part and SMIC brackets. Still after both towing eyes and bolts and the lower factory side ducting plastic parts. PM me if you find you have any of the parts. Link to comment Share on other sites More sharing options...
Shane Posted April 4, 2016 Share Posted April 4, 2016 Hi all. Hopefully Simon (bignum) will have sorted me for the curved plastic part and SMIC brackets. Still after both towing eyes and bolts and the lower factory side ducting plastic parts. PM me if you find you have any of the parts. Hi I do have one tow eye, yours if you still need it. Link to comment Share on other sites More sharing options...
mwilkinson Posted April 4, 2016 Author Share Posted April 4, 2016 Hi I do have one tow eye, yours if you still need it. Hi Shane. Do you have the bolts for it too? Link to comment Share on other sites More sharing options...
Shane Posted April 4, 2016 Share Posted April 4, 2016 Hi Shane. Do you have the bolts for it too? Not.to hand, they would have been chucked in my jap bolt tub. If you have the dims I may be able to identify and pull them.out, but no promises. Link to comment Share on other sites More sharing options...
Recommended Posts