TBDevelopments Posted February 21, 2016 Share Posted February 21, 2016 (edited) Luckily i managed to get a 3.5" powerhouse amuse r1 titanium exhaust. Because there so rare im tempted to do my own line of exhausts based on this rare system. What you think? Lay next to my blitz nurspec on the car Tim TBDevelopments Edited February 21, 2016 by TBDevelopments (see edit history) Quote Link to comment Share on other sites More sharing options...
Glanza_Mike Posted February 21, 2016 Share Posted February 21, 2016 Lovely system, i had the R1000 on my car and it sounded beautiful. Depending on price i would and other i presume would be interested. Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 21, 2016 Author Share Posted February 21, 2016 Id probably do it in stainless over titanium for now, but still 3.5" and same dimensions. Would be aiming around 450-475 Tim TBDevelopments Quote Link to comment Share on other sites More sharing options...
black_widow87 Posted February 21, 2016 Share Posted February 21, 2016 Very nice looking exhaust, Id possibly be interested. Quote Link to comment Share on other sites More sharing options...
MattP Posted February 21, 2016 Share Posted February 21, 2016 I was more concerned about something you mentioned in another thread about putting a flexi in one of the decat pipes. Is that a big problem as I have never come across anybody saying they have had a failed exhaust pipe on a supra Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted February 21, 2016 Share Posted February 21, 2016 I was more concerned about something you mentioned in another thread about putting a flexi in one of the decat pipes. Is that a big problem as I have never come across anybody saying they have had a failed exhaust pipe on a supra I'd be interested to hear this too, as I plan on fitting a flexi to my second decat pipe to take some strain off my HKS manifold. Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 21, 2016 Author Share Posted February 21, 2016 Well there is a flexi in the oem pipe. I recently fitted a full exhaust pipe to a customers car and when it was all bolted up you could move the engine on its mounts by pushing the tip up and down. It was acting like a large lever. I WILL be doing my own range of 1st and 2ndary decats, the 1st will contain a flexi section Just thought it would be nice to offer the remaining part of the exhaust aswell Tim TBDevelopments Quote Link to comment Share on other sites More sharing options...
MattP Posted February 21, 2016 Share Posted February 21, 2016 Well there is a flexi in the oem pipe. I recently fitted a full exhaust pipe to a customers car and when it was all bolted up you could move the engine on its mounts by pushing the tip up and down. It was acting like a large lever. I WILL be doing my own range of 1st and 2ndary decats, the 1st will contain a flexi section Just thought it would be nice to offer the remaining part of the exhaust aswell Tim TBDevelopments Quote Link to comment Share on other sites More sharing options...
MattP Posted February 21, 2016 Share Posted February 21, 2016 *repost Quote Link to comment Share on other sites More sharing options...
mike33 Posted February 21, 2016 Share Posted February 21, 2016 Interested to know what it sounds like next to the Blitz nurspec R! Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 22, 2016 Author Share Posted February 22, 2016 Well i plan to take all the measurements in the next few days, then why my supras in for a service ill fit this to see. It will only be temporarily though as its git a big dent on the underside but wont effect testing. Tim TBDevelopments Quote Link to comment Share on other sites More sharing options...
MattP Posted February 22, 2016 Share Posted February 22, 2016 Off topic.... But I was working under the car today and I have an SRD aluminium engine bay belly plate and I was looking at the under front bumper section the big plastic bit that connects to the wheel arch liners. It looks relatively simple to replicate with aluminium I was wondering why no traders had mocked one up for sale is this something you would look at doing? Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 22, 2016 Author Share Posted February 22, 2016 Got a picture Quote Link to comment Share on other sites More sharing options...
LasseV Posted February 22, 2016 Share Posted February 22, 2016 It's good to have a more good quality choices When this is ready for sale? Quote Link to comment Share on other sites More sharing options...
Lee P Posted February 22, 2016 Share Posted February 22, 2016 Off topic.... But I was working under the car today and I have an SRD aluminium engine bay belly plate and I was looking at the under front bumper section the big plastic bit that connects to the wheel arch liners. It looks relatively simple to replicate with aluminium I was wondering why no traders had mocked one up for sale is this something you would look at doing? We have actually done a prototype for this already and will be ready very soon. Will put a thread up for it this week with details. Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 22, 2016 Author Share Posted February 22, 2016 No idea on time scales, only just got it. There you go guys SRD has that panel covered for you Tim TBDevelopments Quote Link to comment Share on other sites More sharing options...
MattP Posted February 22, 2016 Share Posted February 22, 2016 We have actually done a prototype for this already and will be ready very soon. Will put a thread up for it this week with details. Well that answers that lol - - - Updated - - - No idea on time scales, only just got it. There you go guys SRD has that panel covered for you Tim TBDevelopments Sorry for the thread Hijack.. Quote Link to comment Share on other sites More sharing options...
Dragonball Posted February 23, 2016 Share Posted February 23, 2016 Id probably do it in stainless over titanium for now, but still 3.5" and same dimensions. Would be aiming around 450-475 Tim TBDevelopments How much? You making these from stainless steel rolled on the thighs of the virgins from the lost tribes of South American? :-) Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 23, 2016 Author Share Posted February 23, 2016 Well stainless rolled in the machine of a hairy fat guy. Does that count haha Hoping about £450.00 for a cat back. Ive ordered the laser cut stainless, so will do a few test pieces. Even the perforated tube is fully stainless. Tim TBDevelopments Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 25, 2016 Author Share Posted February 25, 2016 You think thats to much? I was basing the price on the 3"whifbitz ones are £430 to £490 range Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 25, 2016 Author Share Posted February 25, 2016 (edited) Had a few minutes spare to had a play with my new sheet roller The muffler can is a perfect copy of the r1000 Tim TBDevelopments Edited February 25, 2016 by TBDevelopments (see edit history) Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted February 25, 2016 Share Posted February 25, 2016 Quote Link to comment Share on other sites More sharing options...
TBDevelopments Posted February 25, 2016 Author Share Posted February 25, 2016 Just waiting on the perforated laser cutting so i can roll that to make the baffles, and ceramic wadding. Ill be able to weld it up to make the completed muffler Quote Link to comment Share on other sites More sharing options...
Lee P Posted February 26, 2016 Share Posted February 26, 2016 Very nice Tim Quote Link to comment Share on other sites More sharing options...
Scott Posted February 26, 2016 Share Posted February 26, 2016 Got to love a custom exhaust. Any plans on a 4" version? The HKS Ti is the best fitting exhaust I have ever put on my car and it doesn't hang anywhere near as low as the nurspec. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.