Noz Posted February 17, 2016 Share Posted February 17, 2016 Has anyone ever blended DoLuck or anyone had any experience with this. I have OEM wings now, but miss my old DoLucks. The fitment was shocking, and they cracked like hell. Thinking of blending onto some OEM wings for OEM fitment and going over them with high quality flexible primer this time. Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted February 17, 2016 Share Posted February 17, 2016 When I have fitted body kits I usually secure them with Sikaflex 221 adhesive, and then blend in with fiberglass and/or body filler. Quote Link to comment Share on other sites More sharing options...
evinX Posted February 17, 2016 Share Posted February 17, 2016 I dont see why you couldnt, it could work. Trim the edges down with a grinder so the fg skin sits like it was bolted to the car, tiger seal it (sikaflex) it down with clamps, and glass/fill/sand/glaze away Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted February 17, 2016 Share Posted February 17, 2016 Think its the best way to get decent fitting for sure, same as rob mitchel did with his do-luck style bonnets. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.