RichTrdAlsop Posted January 30, 2016 Share Posted January 30, 2016 I currently have an NA5, and looking to upgrade the box to handle a single turbo gte, circa 6-700bhp. My first thoughts were bite the bullet, and fork out for a 6 speed, but recently ive been warming to the idea of a built auto box, specifically one from SRD. What 'stage' would i need for my power goal? What are people's opinions on pros and cons for each? Any input appreciated. Link to comment Share on other sites More sharing options...
RichTrdAlsop Posted February 2, 2016 Author Share Posted February 2, 2016 .. Link to comment Share on other sites More sharing options...
ripped_fear Posted February 2, 2016 Share Posted February 2, 2016 Think your best bet would be to contact Lee himself. Im sure he will be able to advice you. Link to comment Share on other sites More sharing options...
j_jza80 Posted February 2, 2016 Share Posted February 2, 2016 Isn't Kaanw selling an uprated auto gearbox at the moment? Link to comment Share on other sites More sharing options...
RichTrdAlsop Posted February 2, 2016 Author Share Posted February 2, 2016 Think your best bet would be to contact Lee himself. Im sure he will be able to advice you. Yeah I most likely will do when I'm ready to buy, was just wondering if anyone had experience of both and had any advice on them. - - - Updated - - - Isn't Kaanw selling an uprated auto gearbox at the moment? He is, but I'm not ready to yet. Link to comment Share on other sites More sharing options...
scott.wild Posted February 2, 2016 Share Posted February 2, 2016 7 speed DCT Link to comment Share on other sites More sharing options...
Chris Bailey Posted February 2, 2016 Share Posted February 2, 2016 Isn't Kaanw selling an uprated auto gearbox at the moment? Kaan's titan box recently sold. - - - Updated - - - I'd recommend getting in contact with Lee at SRD and letting him talk you through options Link to comment Share on other sites More sharing options...
Chris Wilson Posted February 3, 2016 Share Posted February 3, 2016 You need to consider where this engine produces useful torque in the RPM range, if it's high up a stock torque converter may not be suitable, and high stall speed ones are just ridiculous in road cars. I would advise you stay with a Getrag six speed for simplicity's sake. Link to comment Share on other sites More sharing options...
ashloys Posted February 3, 2016 Share Posted February 3, 2016 600BHP should be safe enough on an R154? Uprated rebuild parts are also readily available from Driftmotion by Marlin Crawler if you do blow it.. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now